View Single Post
Old 12-18-2014, 12:56 AM
bkrishnaswam bkrishnaswam is offline
Aspiring Member
Join Date: Sep 2013
Posts: 2
bkrishnaswam has 10 reputation points


First you need to set-up a tftp server and make sure the any of the switch vlan IP and the TFTP server IP are on same IP networks, tftp server IP must be reachable from the switch.

There are many free tftp severs you can download from theInternet.

Once you are set, use the following commands to save the config from old switch to tftp server and restore the same from tftp server to new switch.

if this is a single switch not connected as a stack. Command below.
copy module-config tftp <filename> <ip> <mod_num>
Ex: copy module-config tftp c:\tftp\Cajunc363tconfig.cfg 1 (ip address of tftp server)
c:\tftp is the drive location for the files stored on the tftp server. CajunC363tconfig.cfg is the filename.

If this is a stack, command below.
copy stack-config tftp <filename> <ip>
If you want to restore the configuration from tftp to Cajun switch, commands below

for single unit copy tftp module-config <filename> <ip>
for stack copy tftp stack-config <filename> <ip>

Hope that helps.

Reply With Quote