View Single Post
  #1  
Old 02-18-2015, 02:10 AM
goe57359 goe57359 is offline
Aspiring Member
 
Join Date: Feb 2015
Posts: 1
goe57359 has 10 reputation points
Default Avaya 4610SW displays: Connecting

Hi,

In our office, random phones (which were working properly) are suddenly showing "Connecting " on top of the display. The phone does not repond to any keys (only beeps).
The only way to get them working again is to disconnect them from the LAN and reconnect them and change the vlan id to 0 via * to program (all the IP addresses are already 0.0.0.0)
Then it gets the same vlan id back via DHCP and the phone works again.
What can this be?

It happens only with the older 4610SW phones (firmware 2.9), not with the 9611G phones.

We have a double HP DL360 configuration with Communication Manager 6.0
Two G650 media gateways.
Phones register to processor ethernet.

Switches: Cisco 4507R+E

Thanks!
Reply With Quote