View Single Post
  #4  
Old 01-07-2014, 06:54 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Solution Delivered Does this info help?

Overview for the Avaya G450 Branch Gateway
************************************************** ***
https://downloads.avaya.com/css/P8/documents/100171681

Voltage: 90-264 VAC, 47-63 Hz
Power rating: 1780 BTU/h (522 W)
Max current: 7 A

Power cord specifications
*******************************
For North America

The cord set must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd wire ground), type SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector rated 10A, 250V. The other end is to be terminated to either a NEMA 5-15P attachment plug for nominal 125V applications or a NEMA 6-15P attachment plug for nominal 250V applications.

For outside North America

The cord must be VDE Certified or Harmonized (HAR), rated 250V, 3-conductor (3rd wire ground), 1.0 mm2 minimum conductor size. The cord is to be terminated at one end to a VDE Certified/CE Marked IEC 60320, sheet C13 type connector rated 10A, 250V and the other end to a 3-conductor grounding type attachment plug rated at a minimum of 10A, 250V and a configuration specific for the region/country in which it will be used. The attachment plug must bear the safety agency certifications mark(s) for the region/country of installation.

Arbi

Last edited by rbrookes; 01-08-2014 at 01:31 PM.
Reply With Quote