View Single Post
Old 04-02-2012, 04:09 PM
dperibadist dperibadist is offline
Aspiring Member
Join Date: Jun 2011
Posts: 1
dperibadist has 10 reputation points
Default Setting up LAN connections on CMS


Prerequisite Information needed:
IP address(es) for the CMS Server.
IP address(es) for the default router(s)
Subnet mask(s) for each IP address.
IP address(es) for each clan/ACD the CMS will connect to

Edit the /etc/hosts file:

# vi /etc/hosts

Add/Change the IP address info:
- For each NIC the CMS will use
- Default Gateway for each NIC (use router, router_1, etc for the node name)
- For each Clan/ACD the CMS will connect to
Write and quit the file.

Create the /etc/defaultrouter file:

# vi /etc/defaultrouter

Remove existing entries.

Add the router node name given in the /etc/hosts file (for the primary NIC only).

Write and quit the file.

Edit the /etc/netmasks file:

# vi /etc/netmasks

Modify the subnet mask if it is different from the default for the IP address that you are using.
Write and quit the file.

If this is the first time for you setting up the IP address on CMS. Please go to and find CMS Software Installation, Maintenance, & Troubleshooting Guide document OR contact Avaya helpdesk and get assistance to setup the correct IP address in the CMS

Dody I. Peribadi ST
Reply With Quote