Thread: 9611 SIP Phones
View Single Post
  #1  
Old 08-22-2013, 01:34 PM
arobert1 arobert1 is offline
Member
 
Join Date: Sep 2011
Posts: 7
arobert1 has 10 reputation points
Default 9611 SIP Phones

I have just installed 9611 SIP Phones.
  • When I make calls to the 9611 SIP phones from H323 Phones all works as it should.
  • When I make calls from SIP Phones to other SIP Phones the call completes and works as it should.
  • When I make calls from the 9611 SIP Phones to H323 phones, I get an error 404 No route available.
  • If I make a call using a 9611 SIP phone outside of the PBX the call completes.
  • When I make calls using the SIP Conference phones to the H323 phones the call completes.
I have noticed in the "li tac traces" that there is a * (Star) before the phone number in the setup digits in the trunk trace. On the calls from the conference phones there is no * (star) and the calls complete, also when I dial the outside line there is no leading * (star) - these calls complete also.
This leads me to believe that the problem is the star but I do not know where to remove it.


Looking for thoughts on where I can remove the star or if the star is supposed to be there where to look next.
Reply With Quote