View Single Post
  #1  
Old 10-11-2017, 08:27 AM
reeve34 reeve34 is offline
Hot Shot
 
Join Date: Sep 2016
Posts: 10
reeve34 has 10 reputation points
Default Konftel IP Dect 10 can't call internally and more

HI I'm trying to get a Konftel IP DECT base and 300W to work correctly. Here is a summary of what works and what doesn't.
The "Phone" is registering correctly to the SM (V6.3.14) and looks identical to a B179 and multiple Audiocodes Mediant gateways.
It has a SIP account on SM, a SIP phone type in CM (6.3) set with EC500 and a corresponding Off-pbx station mapping.
What works.
All external numbers that directly route out.
Calls from CM to the Phone
Calls that are in ARS digit that go to AAR, that then route out over ARS
B179 to this phone, both on same SM

What does not work (call drops after connection)
Calls from the IP phone to CM extensions. The called extension ring once then drops.
Calls that are in the ARS digit conversion that are routed to AAR to prevent them and routed to an extension (VDN, EXT, ATT)
Calls that are in the ARS digit conversion, that are routed to aar then to extension that is off pbx e.g. Aura messaging and Aura Conferencing.

What does not work - Call does not drop
Konftel to B179
The timer counts up on Konftel but never connects

So in summary it seems that all calls that are routed to an internal (CM) extension directly or indirectly fail, even if they are not physically part of the CM. This I guess would include the B179
Calls that leave CM/SM completely seem to work OK
Reply With Quote