View Single Post
  #2  
Old 04-02-2012, 04:09 PM
dperibadist dperibadist is offline
Aspiring Member
.
 
Join Date: Jun 2011
Posts: 1
dperibadist has 10 reputation points
Default Setting up LAN connections on CMS

ADMINISTER ETHERNET LAN IP ADDRESSES:

Prerequisite Information needed:
IP address(es) for the CMS Server.
IP address(es) for the default router(s)
Subnet mask(s) for each IP address.
IP address(es) for each clan/ACD the CMS will connect to

Edit the /etc/hosts file:

# vi /etc/hosts

Add/Change the IP address info:
- For each NIC the CMS will use
- Default Gateway for each NIC (use router, router_1, etc for the node name)
- For each Clan/ACD the CMS will connect to
Write and quit the file.

Create the /etc/defaultrouter file:

# vi /etc/defaultrouter

Remove existing entries.

Add the router node name given in the /etc/hosts file (for the primary NIC only).

Write and quit the file.


Edit the /etc/netmasks file:

# vi /etc/netmasks

Modify the subnet mask if it is different from the default for the IP address that you are using.
Write and quit the file.

Note:
If this is the first time for you setting up the IP address on CMS. Please go to http://support.avaya.com and find CMS Software Installation, Maintenance, & Troubleshooting Guide document OR contact Avaya helpdesk and get assistance to setup the correct IP address in the CMS


Dody I. Peribadi ST
Reply With Quote