View Single Post
  #2  
Old 07-11-2013, 05:02 PM
rvengco rvengco is offline
Whiz
.
 
Join Date: Jul 2010
Posts: 35
rvengco has 10 reputation points
Default

Hi Henning,

The answer is No. MCC is no longer supported in CM 6.X

If you will check the document Avaya Aura® Communication Manager Hardware Description and Reference for CM6, MCC is no longer mentioned in the list of Media gateways.

You may check it in the below link.
https://downloads.avaya.com/css/P8/documents/100089460

Additonally looking at the document Upgrading to Avaya Aura® Communication Manager Release" Under the topic "Upgrading DEFINITY SI or R Server to the S8800 Server"on page 255 owhich is on the below link
https://downloads.avaya.com/css/P8/documents/100089318

Introduction
This section describes the procedure to upgrade the following servers to Communication Manager Release 6.0.1 on S8800 Server, HP ProLiant DL360 G7 Server or Dell™ PowerEdge™ R610 Server:
• DEFINITY SI Server in an SCC1 or an MCC1
• DEFINITY R Server in an MCC1


In this procedure:
• You discard:
- All port networks (SCCs or MCCs)
- SI or R processor circuit pack


• You install:
- A G650 Media Gateway and move the supported circuit packs to the media
gateway.
- An S8800 Server, HP ProLiant DL360 G7 Server, or Dell™ PowerEdge™ R610
Server running System Platform and the simplex main/survivable core template
(CM_Simplex).


Hope this helps
Reply With Quote