Can't get second dial tone

[sguoji]

I have a ipo 8.1.67. I can get the secondary dial tone use only one short code in the sytem shortcode or user short code . such as 9N/N/50main. But When I use two short code , such as 9N/N/50main 90N/0N/50main ,then I can't get the secondrary dial tone . Does anyboby have the same problem ?

[thiel2]

Why the 90N shortcode? 9N covers it as well.

[sguoji]

Thanks for your response. I want to set DDD and IDD with 90N and 900N short code .

[pdgavin]

As thiel2 stated, the 9N short code will send the call to the ARS table for any number including 90 so it is not necessary to add a second system short code. By doing so you are creating your own problem. The system is waiting to see if you will dial a 0 after the 9 and that is why you are not getting the second dial tone.

If you want to do something with 90 like send it to a busy signal or out a different trunk you can do this with a short code in the ARS table. It does not have to be a system short code.


Pete