Avaya Support Forums  
HomeContactsHow To Buy

Go Back   Avaya Support Forums > IP Telephony and Convergence
Reload this Page 96XX Button Layout Needs to Match CM
FAQ Forum Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-08-2016, 10:40 AM
rwallo rwallo is offline
Whiz
  
Join Date: Dec 2013
Location: Slidell LA
Posts: 29
rwallo has 11 reputation points
Default 96XX Button Layout Needs to Match CM
Good day folks

I have a site that would prefer to have the 9609/9611 buttons to appear on the phone exactly like they are in programming - Not to have call and bridged appearances move automatically to the first page.

Anyone know of the setting that places all the buttons exactly where they are programmed for the 96XX?

FYI: working with 96XX firmware 6.6.1, CM 6.0.1 and 6.3.111.

Thanks!
Reply With Quote
  #2  
Old 03-09-2016, 02:36 PM
fazil3 fazil3 is offline
Whiz
  
Join Date: Feb 2015
Posts: 35
fazil3 has 12 reputation points
Default
Not sure if they will appear as it is. But you can test the below 46xxsettings.txt

SET PHNSCRALL 1 - A consolidated screen will be displayed that includes call appearances and features

SET FBONCASCREEN 1 - As many features as will fit will be displayed on the same screen as call appearances, in addition to being displayed on a separate feature screen.

PHNSCRCOLUMNS specifies whether the Phone Screen is presented with one (full-witdth) or two (each half-width) columns
## This parameter is relevant only for 9608, 9608G and 9611G phones only.

## 0 call appearance and feature button occupies the entire width of the Line (default)
## 1 call appearance and feature button occupies half the width of the Line
Reply With Quote
  #3  
Old 02-15-2018, 04:10 PM
coreyprimeaux coreyprimeaux is offline
Member
  
Join Date: Jul 2013
Posts: 3
coreyprimeaux has 10 reputation points
Default
Did this fix your issue?
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 11:45 AM.

Avaya Support Forums - Archive - Top

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.