Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-28-2017, 03:11 PM
ssmokinjoe ssmokinjoe is offline
Hot Shot
 
Join Date: Dec 2013
Posts: 17
ssmokinjoe has 12 reputation points
Question Individual inbound call blocking to and extension/DID

Good afternoon,
I have been asked to provide a way for calls to be blocked from calling specific DID’s. In other words, if a vendor I deal with on a regular basis happens to get my supervisor’s number he would like to be able to block his call from reaching him but not block the call from reaching me.I know that the number can be blocked system-wide; I just don’t have any idea how to accomplish this on an individual basis and give the end-user control of blocking the number, if that’s even possible. We are on CM 6.3 and use a mixture of 2420 digital and 9608 IP phones.Thank you in advance for any help.

Joe
__________________
Joe Lio
I.T. & Telephony Support
South Florida Educational FCU
Miami, FL
305.270.5290
Reply With Quote
  #2  
Old 03-06-2017, 08:55 AM
jacob31 jacob31 is offline
Aspiring Member
 
Join Date: Oct 2012
Posts: 2
jacob31 has 10 reputation points
Default

I am struggling with a very similar issue. Please post a solution if you find one.
Reply With Quote
  #3  
Old 03-06-2017, 01:30 PM
mlombardi1's Avatar
mlombardi1 mlombardi1 is offline
Legend
 
Join Date: Sep 2010
Location: New York
Posts: 403
mlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation points
Default

Send all incoming calls to your supervisor's DID to a vector. Using a vector routing table, routing decisions can be made based on the received CID (or ANI as the vector calls it).

Check out the sixth post in this thread for details: http://www.iaug.org/p/fo/et/thread=13409

Last edited by mlombardi1; 03-06-2017 at 01:32 PM.
Reply With Quote
  #4  
Old 03-07-2017, 05:48 AM
jacob31 jacob31 is offline
Aspiring Member
 
Join Date: Oct 2012
Posts: 2
jacob31 has 10 reputation points
Default

Thanks for the help, but that is not exactly the direction I am going in. I have used both methods mentioned in that post. In my case I don't want to completely block the call and I don't know which DID the person is calling. So I want to control the call by the caller ID.

We have 2 SIP trunks that all of our inbound traffic comes through. I would like to be able to do something in our System Manager to recognize the caller ID and send the call where I want it to go.
Reply With Quote
  #5  
Old 03-08-2017, 01:47 PM
mlombardi1's Avatar
mlombardi1 mlombardi1 is offline
Legend
 
Join Date: Sep 2010
Location: New York
Posts: 403
mlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation points
Default

SM doesn't route based on ANI. If you have an Avaya SBC-E, a SigMa script can be written to inspect the From header and manipulate the destination URI if a match is found. For example if From = x, then insert a * in front of the URI. Use this as a flag for alternate treatment in SM or CM based on digit mapping.
Reply With Quote
Reply

Tags
call blocking

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 01:42 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.