Avaya Support Forums  
HomeContactsHow To Buy

Go Back   Avaya Support Forums > Enterprise PBX Communications Systems
Reload this Page Problem routing to an external # via vector step
FAQ Forum Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-12-2016, 09:36 AM
ceped2 ceped2 is offline
Member
  
Join Date: Oct 2014
Location: Mexico
Posts: 8
ceped2 has 11 reputation points
Default Problem routing to an external # via vector step
Hi,

Hope some can shed a light to the problem Im having, this is the scenario:

Call comes in to phone A,on no answer is sent to Coverage Path 164 with Point 1: v1464, VDN 1464 is pointing to Vector 164 where caller hears announcement and than calls should be routed to a cel phone number.

All goes well until the last part where on the trace I see " route-to number 904481163xxxxx cov y if unconditionally" and "LEAVING VECTOR PROCESSING cid 4347" but I dont get a Dial event after that only an "idle trunk-group 1 member 3". I have a similar environment and configured the same call treatment and after the "LEAVING VECTOR PROCESSING" I get a dial event, term trunk and another dial event (traces below).

COVERAGE PATH 164:

display coverage path 164
COVERAGE PATH

Coverage Path Number: 164
Cvg Enabled for VDN Route-To Party? y Hunt after Coverage? n
Next Path Number: Linkage

COVERAGE CRITERIA
Station/Group Status Inside Call Outside Call
Active? n n
Busy? y y
Don't Answer? y y Number of Rings: 3
All? n n
DND/SAC/Goto Cover? y y
Holiday Coverage? n n
Logged off/PSA/TTI? y y Number of Rings: 2

COVERAGE POINTS
Terminate to Coverage Pts. with Bridged Appearances? n
Point1: v1464 Rng: Point2:
Point3: Point4:
Point5: Point6:


VDN Configuration:

display vdn 1464 Page 1 of 2
VECTOR DIRECTORY NUMBER

Extension: 1464
Name*: Desvio Ext 1664
Destination: Vector Number 164
Attendant Vectoring? n
Meet-me Conferencing? n
Allow VDN Override? n
COR: 4
TN*: 1
Measured: none


VDN of Origin Annc. Extension*:






* Follows VDN Override Rules


VECTOR Configuration:

display vector 164 Page 1 of 6
CALL VECTOR

Number: 164 Name: Desvio Ext 1664
Multimedia? n Attendant Vectoring? n Meet-me Conf? n Lock? n
Basic? y EAS? n G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? n
Prompting? y LAI? n G3V4 Adv Route? y CINFO? y BSR? n Holidays? y
Variables? n 3.0 Enhanced? n
01 announcement 1597
02 route-to number 9xxxxxxx with cov y if unconditionally
03 stop
04
05


List trace not completing the call:


LIST TRACE

time data

15:56:14 TRACE STARTED 12/09/2016 CM Release String cold-03.0.124.0-22147
15:56:29 Calling party trunk-group 1 member 3 cid 0x10fb
15:56:29 Calling Number & Name 81847xxxx location
15:56:29 dial 91664# route:ARS
15:56:29 ring station 1664 cid 0x10fb
15:56:29 G711MU ssff ps:20
rgn:1 [192.168.11.185]:2288
rgn:1 [192.168.11.3]:2080
15:56:29 dial 1664
15:56:29 seize trunk-group 99 member 45 cid 0x10fd
15:56:29 Calling Number & Name NO-CPNumber NO-CPName
15:56:29 SIP>INVITE sip:1664@sip.test.com SIP/2.0
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 Setup digits 1664
15:56:29 Calling Number & Name 81847xxxxx NO-CPName
15:56:29 Proceed trunk-group 99 member 45 cid 0x10fd
15:56:29 SIP<INVITE sip:1664@sip.test.com SIP/2.0
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP>INVITE sip:1664@sip.test.com SIP/2.0
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP<SIP/2.0 100 Trying
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP>SIP/2.0 100 Trying
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP<SIP/2.0 480 Temporarily Unavailable (User not registere
15:56:29 SIP<d)
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP>ACK sip:1664@192.168.11.17 SIP/2.0
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP>SIP/2.0 480 Temporarily Unavailable (User not registere
15:56:29 SIP>d)
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 SIP>ACK sip:1664@sip.test.com SIP/2.0
15:56:29 Call-ID: 809e73b071cfe61fe15581a35c800
15:56:29 denial event 1181: User alerting, no answer D1=0xe0011 D2=0x13
15:56:29 idle trunk-group 99 member 45 cid 0x10fd
15:56:44 SIP>PUBLISH sips:1664@sip.test.com SIP/2.0
15:56:44 Call-ID: 06fdb971cfe61316581a35c800
15:56:44 no answer station 1664 cid 0x10fb
15:56:44 coverage-path 164 point 1 cid 0x10fb
15:56:44 0 0 ENTERING TRACE cid 4347
15:56:44 164 1 vdn e1464 bsr appl 0 strategy 1st-found override n
15:56:44 164 1 announcement 1597
15:56:44 164 1 announcement: board 001V9 ann ext: 1597
15:56:44 dial 91664#
15:56:44 ring announcement 1597 cid 0x10fb
15:56:44 active announcement 1597 cid 0x10fb
15:56:44 hear annc board 001V9 ext 1597 cid 0x10fb
15:56:44 SIP<SIP/2.0 200 OK
15:56:44 Call-ID: 06fdb971cfe61316581a35c800
15:56:49 idle announcement cid 0x10fb
15:56:49 164 2 route-to number 904481163xxxxx cov y if unconditionally
15:56:49 164 3 LEAVING VECTOR PROCESSING cid 4347
15:57:08 idle trunk-group 1 member 3 cid 0x10fb
15:57:21 TRACE COMPLETE station 1664 cid 0x0


List trace where call gets completed in diferrent eviroment:

LIST TRACE

time data

12:06:29 TRACE STARTED 12/09/2016 CM Release String cold-02.0.823.0-21388
12:06:38 Calling party trunk-group 5 member 1 cid 0x37b
12:06:38 Calling Number & Name 81847xxxxx carrier
12:06:38 dial 9*2124 route:ARS
12:06:38 term station 2124 cid 0x37b
12:06:38 dial 2124
12:06:38 seize trunk-group 3 member 9 cid 0x37c
12:06:38 Calling Number & Name NO-CPNumber NO-CPName
12:06:38 SIP>INVITE sip:2124@sip.test2.com SIP/2.0
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 Setup digits 2124
12:06:38 Calling Number & Name 81847xxxxx NO-CPName
12:06:38 SIP<SIP/2.0 100 Trying
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 Proceed trunk-group 3 member 9 cid 0x37c
12:06:38 SIP>INVITE sip:2124@sip.test2.com SIP/2.0
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 SIP>SIP/2.0 100 Trying
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 SIP>SIP/2.0 180 Ringing
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 SIP<SIP/2.0 180 Ringing
12:06:38 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:38 Alert trunk-group 3 member 9 cid 0x37c
12:06:48 no answer station 2124 cid 0x37b
12:06:48 coverage-path 86 point 1 cid 0x37b
12:06:48 SIP>CANCEL sip:2124@sip.test2.com SIP/2.0
12:06:48 Call-ID: 06ec79351cfe613a235869fdbf00
12:06:48 idle trunk-group 3 cid 0x37c
12:06:48 0 0 ENTERING TRACE cid 891
12:06:48 86 1 vdn e2156 bsr appl 0 strategy 1st-found override n
12:06:48 86 1 announcement 1107
12:06:48 86 1 announcement: board 001V9 ann ext: 1107
12:06:48 dial 9*2124
12:06:48 ring announcement 1107 cid 0x37b
12:06:48 active announcement 1107 cid 0x37b
12:06:48 hear annc board 001V9 ext 1107 cid 0x37b
12:06:56 idle announcement cid 0x37b
12:06:56 86 2 route-to number 904481163xxxxx cov y if unconditionally
12:06:56 86 3 LEAVING VECTOR PROCESSING cid 891
12:06:56 dial 904481163xxxxx route:ARS
12:06:56 term trunk-group 5 cid 0x37b
12:06:56 dial 904481163xxxxx route:ARS
12:06:56 route-pattern 1 preference 1 location 1 cid 0x37b
12:06:56 seize trunk-group 5 member 30 cid 0x37b
12:06:59 End-of-dial trunk-group 5 member 30 cid 0x37b
12:07:05 dial 904481163xxxxx route:ARS
12:07:05 ring 04481163xxxxx
12:07:11 idle trunk-group 5 member 1 cid 0x37b
Reply With Quote
  #2  
Old 12-19-2016, 11:09 PM
kurum1 kurum1 is offline
Aspiring Member
  
Join Date: Dec 2016
Posts: 1
kurum1 has 10 reputation points
Default
Please check in vector step :-route to number ARS code +Mobile number
And also include first step.1 wait time 0 seconds for silence
Last edited by kurum1; 12-20-2016 at 02:07 AM.
Reply With Quote
  #3  
Old 04-23-2018, 06:54 AM
abbas59 abbas59 is offline
Aspiring Member
  
Join Date: Apr 2018
Posts: 1
abbas59 has 10 reputation points
Default
In Vec 164 step 02,

02 route-to number 9xxxxxxx with cov y if unconditionally

Answer is below,

You have to make tac (Trunk access code) of trunk group instead of 9 it will work .....
Reply With Quote
  #4  
Old 04-25-2018, 08:12 AM
hurdk hurdk is offline
Brainiac
  
Join Date: Oct 2015
Posts: 67
hurdk has 11 reputation points
Default
did you make sure the number you are out calling is routable in SMGR/ASM?
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 08:59 AM.

Avaya Support Forums - Archive - Top

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.