Can't obtain correct value for ANI in AVP using cti connector

[dfrade]

Hi all,

We have a problem using cti connector in dialog designer application with VoicePortal 5.1. The application only writes to trace.log the value of :
--------------------
session dnis
session ani
cticallinfo: ani
cticallinfo dnis
--------------------

Whole example of the call:
customer call to ddi, and is routed to VDN and then to agent.
Agent makes a consultation call to another second VDN and finish the transfer.

If no agents answer in the second VDN , call is routed to Voice Portal VDN, and then to Voice Portal Application.

I recieve "cticallinfo: ani" like this: "T2501#1" instead of real customer ANI. I guess this is the Dynamic Device ID, but i don't know why it is populating this, instead of real customer ANI.
¿What is happening?, ¿Does anybody know how to fix this behaviour?

[wawior]

It can happen if Caller has CLIR enabled.

Regards
Michał

[dfrade]

Could you explain me how to do it?

I guess is in system parameters features, in
CPN/ANI/ICLID Replacement for Restricted Calls:

CPN/ANI/ICLID Replacement for Unavailable Calls:
¿is it true?

What i should write there?

Thank you very much

[wawior]

I mean,

that Caller Mobile Phone can have CLIR enable - so operator would not allow to present his number.

[dfrade]

Now I understand wat you mean with CLIR.

No, is not our case, customer and test that we have done, were without CLIR enabled...

It must be another thing.

In any case, thanks for your answer.

[dfrade]

Anybody knows how to help me?