DECT IP Trunks
Avaya system using S8710 servers upgraded to Software Version R015x.02.0.947.3
Installed AVAYA DECT 6.0 system with a master and standby master IPBS. 10 members of a trunk group are associated with signalling group 7 that points to the master IPBS. 10 members of the same trunk group are associated with signalling group 6 that point to the standby master IPBS. The 10 members with signaling group 6 show in service. They should show as being in a standby mode so that when the master goes down the calls are routed to the standby master. Unless the master is down the standby master is not operationally ready to process calls.
The scenario is when calls are made to a phone number that is being monitored using list trace the calls increment through the trunk group members from one to ten ringing the DECT phone correctly, the eleventh through 20th calls do not ring the DECT phone because the standby master is not operational.
What settings need to be changed to trigger the state of the members associated with signaling group 6 to be out of service until the master is out of service?
|
06-01-2010, 08:41 AM
Threaded Mode