Avaya Support Forums  

Go Back   Avaya Support Forums > Mobile Communications

Thread Tools Search this Thread Display Modes
Old 09-27-2010, 12:28 PM
rpetty rpetty is offline
Join Date: Jun 2010
Location: Denton, TX
Posts: 5
rpetty has 10 reputation points
Default X-Mobile using EC500 v5.2.1 vs. 6.0

I am having an issue getting an X-mobile station to give a call waiting indication when it is associated with a multi-line telephone such as a 6424D+M or 9640G telephone.

The scenario is this:

I have a multi-line telephone 6424D+M programmed with three call appearances for DID extension number 5268. The X-mobile 3725 phone is programmed as a non-DID extension (2097). In the off-pbx-telephone station mapping, extension 5268 is mapped to extension 2097 with the proper trunk, config set, call limit, mapping mode, calls allowed and bridged calls. If I call 5268 the X-mobile DECT phone extension 2097 rings and I can pick up the call.

Subsequent calls to 5268 only ring on the next call appearance on 5268, they do not provide a signal to the X-mobile DECT phone extension 2097 to provide a call-waiting indication so the call can be answered on the X-mobile DECT phone extension 2097. (It is noted that calling extension 2097 while 2097 is already engaged in a call, the X-mobile DECT phone extension 2097does provide a call-waiting indication.)

We currently are using CM v5.2.1, is anyone using the DECT 3725 handsets with CM v6.0?

If so, does the issue of call waiting we are experiencing with CM v5.2.1 disappear with CM v6.0?

Last edited by rpetty; 09-27-2010 at 01:05 PM. Reason: clarification
Reply With Quote
Old 10-01-2010, 02:23 AM
mishra10 mishra10 is offline
Aspiring Member
Join Date: Oct 2010
Posts: 1
mishra10 has 10 reputation points
Default response

The answer to this would be this is the way that EC500 interacts with the DECT. It is also one of the problems when administering the DECT as an EC500 extention of a digital station. I believe that this would be classed as WAD. If the customer realy want to have the stations that call to the principle come through to the DECT, then the first two line appearances would have to be bridged to the DECT.
ASCOM DECT(DECT R4) solution is tested with CM 6 and the scenario is going to be the same there as well.
Reply With Quote
Old 07-01-2016, 05:48 AM
ipenu ipenu is offline
Aspiring Member
Join Date: Jun 2016
Posts: 1
ipenu has 10 reputation points
Default Dect ec500

Hi all,

I have a customer that is using deskphones and EC500 to DECT phones. In this moment, when someone is calling and the call is being answered from the deskphone, on the DECT phone the call is showed as missed. Is it possible that in this situation, the call on the DECT to be showed also as answered, even the cal was anwered on the deskphone?
Thanks a lot.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 04:07 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.