Avaya Support Forums  

Go Back   Avaya Support Forums > Telephones, Adjuncts, and Adapters

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-03-2013, 10:36 PM
rblas rblas is offline
Member
 
Join Date: Jul 2013
Posts: 4
rblas has 10 reputation points
Default 9641G Firmware upgrade and implementation

How do I update my 9641G IP Phones when I DONT have a file server integrated into the architecture? 99.9% of our endpoints are TDM off our CM4 servers.

We currently aquired 9641G phones that state that the minimum CM requirement is CM 5.2. ....Despite that, we were able to program those stations with Communication Manager 4 and successfully process calls.

I would like to update the firmware for those phones from S6.1.

The phones have this load:
9641G
Avaya One-X Deskphone S6.1.0
Protocol: H323
Application file: S9621_41HALBR6_1r15_V4r52.tar
Kernel/RFS file: S96x1_UKR_V0r15_V0r15.tar

Like I mentioned earlier, we do not have a file server integrated into this system.


Thank you,
Ray
Reply With Quote
  #2  
Old 11-04-2013, 03:52 PM
gwebster gwebster is offline
Guru
.
 
Join Date: Mar 2010
Location: Ottawa
Posts: 141
gwebster has 25 to 49 reputation pointsgwebster has 25 to 49 reputation points
Default

You need an http server to upgrade the software on the 9641G, to provide it with configurable settings (via the 46xxsettings.txt file), and to backup settings/contacts/logs.
Reply With Quote
  #3  
Old 12-12-2013, 08:18 PM
rblas rblas is offline
Member
 
Join Date: Jul 2013
Posts: 4
rblas has 10 reputation points
Default

Thanks,

Here is where I am at so far.

1) I had unzipped downloaded upgrade the file into the Root directory of the HTTP server like the documentation said to.
2) I restarted the HTTP service
3) Entered the IP of the HTTP server into the 9641G
4) Rebooted the phone

Phone rebooted,
Acknowledged the HTTP server
and booted normally.

There was no indication that it had found or used the upgrade file.

I am stuck...
Reply With Quote
  #4  
Old 12-13-2013, 05:05 AM
gwebster gwebster is offline
Guru
.
 
Join Date: Mar 2010
Location: Ottawa
Posts: 141
gwebster has 25 to 49 reputation pointsgwebster has 25 to 49 reputation points
Default

Using packet capture software (wireshark), do you see a GET request for 96x1Hupgrade.txt leaving the phone and making it all the way to your http server?
Looking at your http server log, do you see it receiving the GET request and responding with the file?
Does the file make it all the way back to the phone?
Reply With Quote
Reply

Tags
9641g, firmware, firmware upgrade h.323

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:12 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.