Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Thread Tools Search this Thread Display Modes
Old 11-03-2010, 08:57 AM
salladej salladej is offline
Join Date: Nov 2010
Location: Fairland, IN
Posts: 6
salladej has 10 reputation points
Question CM 6.0 and system platform

In a CM HA pair 6.0/SysPlatform environment I may have several IP addresses. The staging form calls them:

S88XX Primary
S88XX Secondary
C - dom
Domain - 0
Utility Server

If I understand the documentation correctly, C-dom, Domain-0 and Utility Server all have their own IP address on each of the 2 HA servers and are each seperate domains/virtual machines existing within the S88xx connected to the Public Bridge created within System Domain/Domain-0. The S88XX Primary and Secondary and alias are the CM server, which is also just another domain/virtual machine?? And of course the alias is the virtual IP used by either the primary or secondary CM depending on which is active at any given time (a VIP).

So is there a physical address associated with the Ethernet port on the S88XX or are they all essentially virtual? In my mind the Domain-0 partition is the "base" for all of this and therefore is the closest thing to a physical address there is... unless you are going to tell me that there is a physical address on the port as well and I just missed that in the docs!?? But otherwise I am thinking these are all virtual addresses and there really is no "physical address" for these two boxes.
Reply With Quote
Old 11-08-2010, 02:42 AM
amitkumarpatil amitkumarpatil is offline
Join Date: Nov 2010
Posts: 4
amitkumarpatil has 10 reputation points

Yes, your are right, all virtual IP addresses are mapped with Dom 0 IP address which uses physical port eth0 on Dom 0. Therefore, Hardware address used would be eth0 port on the server.
Reply With Quote
Old 11-26-2010, 02:21 PM
romartinez1 romartinez1 is offline
Aspiring Member
Join Date: Nov 2010
Posts: 1
romartinez1 has 10 reputation points
Default problems s8800 avaya aura and CM 5.2.1 and gateway 450

1. my problem is I can not make them see this on the CM system platform and gateway G450, not that I set in CM because they set the media gateway and be unable
2. failed to lift the phone ip
Reply With Quote
Old 07-22-2013, 03:18 PM
rblas rblas is offline
Join Date: Jul 2013
Posts: 4
rblas has 10 reputation points
Default Cannot access 1 of 2 servers via VIP

Any input is appreciated or Please direct me to the correct thread or disscussion.

-I have server "A" as primary (active) and server "B" as secondary (standby).

-When server "B" becomes active I am unable to access it via the VIP (Virtual IP Address).

- I have no problem accessing server "A" via the VIP while it is active.

Server: S8720

Thank you
Reply With Quote

cm 6.0, ip address, system platform

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 02:17 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.