Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Thread Tools Search this Thread Display Modes
Old 07-27-2017, 02:16 AM
rkraut rkraut is offline
Join Date: Apr 2015
Posts: 3
rkraut has 10 reputation points
Default Upgrade CM_SurvRemote failed

I would like to do upgrade CM template version 6.2 to 6.3 and it is failed:

This template cannot be used to upgrade the currently installed template. See the Event Logs under Log Viewer for details.

Event Log:
disk lv_cm_var is required to be preserved, but has different capacity in exiting template than upgrade template.

Current version
CM_SurvRemote (cm 06.2-02.0.823.0, utility_server, bsm

New version:
CM_Surv_Remote or - same problem

System Platform is on old version 6.2.2. I will upgrade it after CM upgrade to last version SP 6.4.1 (PCN#1798S:Important Note: If upgrading System Platform to 6.3.8 or higher on a server running a release of Communication Manager lower than or,
Communication Manager or or higher should be activated prior
to upgrading to System Platform 6.3.8 or higher (e.g., 6.4). Any Communication
Manager Service Pack lower than or is incompatible with System
Platform 6.3.8 or higher.) https://downloads.avaya.com/css/P8/documents/100173682

Do you have any idea? Thanks Radek
Reply With Quote
Old 07-27-2017, 05:35 AM
mlombardi1's Avatar
mlombardi1 mlombardi1 is offline
Join Date: Sep 2010
Location: New York
Posts: 511
mlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation pointsmlombardi1 has 25 to 49 reputation points

Check the memory configuration on the CM virtual machine. Previous versions of CM would allow you to set the memory configuration on the S8300 server to medium or large which is technically unsupported. The memory should be set to small on the S8300 platform.

I've run into this and ended up installing a fresh load of CM 6.3 and retranslating the system using ProVision. Not fun.
Meridian IT - Senior Engineer
Reply With Quote
Old 07-27-2017, 05:52 AM
rkraut rkraut is offline
Join Date: Apr 2015
Posts: 3
rkraut has 10 reputation points

There is a HP DL360G7 server. Memory config is large on the ESS and Main server.
May be, I found a solution.
First I did upgrade SP to 6.3.7, then upgrade template to ("141") + last patches for CM and US.
Now I am doing next ugrade SP to 6.4.0. Then, I will install patch for SP 6.4.1 and upgrade VM_services. I hope, it will be OK.
Reply With Quote

communication manager, system platform, upgrade

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 11:08 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.