![]() ![]() |
#1
|
|||
|
|||
![]()
Usb modem with accept incoming calls but when run testinads, will not go off hook and dial. Any ideas. s8300 lsp in g350 cm4.0.5 742
|
#2
|
|||
|
|||
![]()
Hi,
"Testinads" will always attempt to dial out to sent a test trap to the destination.This is configured in almcall if you are using a modem to dialout or almsnmp if its via SSG/ASG. Check if you have configured SNMP destination or OSS number by running the following commands:- almcall almsnmpconf Thanks, Sree |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|