Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-09-2011, 07:30 AM
telferkj telferkj is offline
Member
 
Join Date: Oct 2010
Posts: 3
telferkj has 10 reputation points
Default TN793CP Firmware

Using the TN793CP Analog board with FW11 [to prevent the board from going into No Board]. However during a recent upgrade to the CM software several TN793CP went into the no board state. Reset system 4 was performed which brought some boards back but caused a different group of these boards to go into the no board state. The only way to rectify the issue was to reseat all the affected boards. Has anyone experienced this issue and is there any updated Firmware releases planned. What logs may help to identify the failure
Reply With Quote
  #2  
Old 11-10-2011, 07:46 PM
hongc hongc is offline
Hot Shot
.
 
Join Date: Aug 2011
Posts: 20
hongc has 10 reputation points
Default

I'm getting an engineer looking into this soon. Thanks!
Reply With Quote
  #3  
Old 11-15-2011, 12:44 AM
hongc hongc is offline
Hot Shot
.
 
Join Date: Aug 2011
Posts: 20
hongc has 10 reputation points
Default

Some questions please:

1) what is the current cm version and what is the patch number? what was the CM version and what was the patch number before the upgrade?

2) Did the issue only happen after the cm upgrade or it's still reproducible?

Thanks,
Tristan
Reply With Quote
  #4  
Old 11-16-2011, 09:46 AM
telferkj telferkj is offline
Member
 
Join Date: Oct 2010
Posts: 3
telferkj has 10 reputation points
Default

Hi The system was running 3.1.5 and was upgraded / migrated to 5.2.1 SP 10. During the upgrade the problem arose. Reset port network would restore some cards and cause others to fail. The only way to resolve was to reseat the circuit pack. Do note the firmware was updated to FW 11 proir to the upgrade.
Reply With Quote
  #5  
Old 11-17-2011, 11:58 PM
hongc hongc is offline
Hot Shot
.
 
Join Date: Aug 2011
Posts: 20
hongc has 10 reputation points
Default

There should be something in the ecs log files, e.g. hardware error log, could at least shed some lights on what happened during the upgrade. If you really need an answer, please open a support ticket with Avaya services.

And I assume the analog boards do not turn into 'NO Board' situation now?

Thanks,
Tristan
Reply With Quote
  #6  
Old 12-14-2011, 08:13 AM
telferkj telferkj is offline
Member
 
Join Date: Oct 2010
Posts: 3
telferkj has 10 reputation points
Smile

Thanks for the update. I will review the logs during the next install and raise a case if the problem re-occurs
Reply With Quote
  #7  
Old 12-29-2011, 03:50 PM
bergsj bergsj is offline
Member
 
Join Date: Dec 2011
Posts: 4
bergsj has 10 reputation points
Default

Quote:
Originally Posted by telferkj View Post
Thanks for the update. I will review the logs during the next install and raise a case if the problem re-occurs

I had the same issue. Uff da.

Jeff
Badge Printers
Reply With Quote
Reply

Tags
firmware, tn793cp

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:29 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.