Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-06-2012, 01:02 AM
hengki hengki is offline
Member
 
Join Date: Jan 2012
Posts: 3
hengki has 10 reputation points
Default VSP 9000 modules cannot recognize SFP

Hi,

I'm setting up a VSP 9000 with 9048GB and 9024XL modules.
When I plug 100BASE-FX (AA1419074-E6), 1000BASE-LX (AA1419049-E6) or 10GBASE-LR (AA1403011-E6) SFP/SFP+, all these SFP/SFP+ can not be recognized by the modules with message: unsupported

VSP-9012:1(config)# CP1 [09/04/12 10:44:56.990] 0x000e0598 00000000 GlobalRouter HAL INFO GBIC inserted in slot 10 Port 7 Type:Unsupported Vendor:Unknown

VSP-9012:1(config)#show pluggable-optical-modules detail

================================================== ==============================
Pluggable Optical Module Info 10/7 Detail
================================================== ==============================
Port: 10/7
Type: Unsupported
DDM Enabled : FALSE
Avaya PEC : CLEI :
Vendor : Unknown Vendor PN :
Vendor REV : 1.0 Vendor SN : AVAGCNC320U93
Vendor Date : 07/24/12
Wavelength : 1310.00 nm


Digital Diagnostic Interface Not Supported


VSP-9012:1(config)#show sys-info

General Info :

SysDescr : VSP-9012 (3.3.1.0) (GA)
SysName : VSP-9012
SysUpTime : 0 day(s), 03:39:50
SysContact : http://support.avaya.com/
SysLocation : 211 Mt. Airy Road,Basking Ridge,NJ 07920

Chassis Info:

Chassis : 9012
Serial# : LBNNTMC2E100GR
H/W Revision : 323500-A 01
H/W Config : 0100
NumSlots : 12
NumPorts : 170
BaseMacAddr : 2c:f4:c5:92:70:00
MacAddrCapacity : 4096
MgmtMacAddr : 2c:f4:c5:92:73:fd
System MTU : 1950

Card Info :


Slot# CardType Serial# Part# Oper Admin Power
Status Status State
1 9080CP LBNNTMC2D101CN EC1404007-E6 up up on
2 9080CP LBNNTMC2D101CG EC1404007-E6 dormant up on
5 9048GT LBNNTMC2D7003X EC1404003-E6 up up on
8 9024XL LBNNTMC2D4018D EC1404001-E6 up up on
9 9048GB LBNNTMC2D700T2 EC1404002-E6 up up on
10 9048GB LBNNTMC2D700RG EC1404002-E6 up up on

SF Info :

Slot# CardType Serial# Part# Oper Admin Power
Status Status State
SF1 9090SF LBNNTMC2D20242 EC1404006-E6 up up on
SF4 9090SF LBNNTMC2D2024W EC1404006-E6 up up on
SF6 9090SF LBNNTMC2D2023D EC1404006-E6 up up on

Temperature Info :

Slot Zone-1 Zone-2 Zone-3 Zone-4 Zone-5 Highest Lowest Alarm Shutdown
Temp Temp Temp Temp Temp Temp Temp Threshold Threshold
1 47 40 -- 42 40 47 40 55 60
2 43 39 -- 40 39 43 39 55 60

5 40 37 39 42 42 42 37 60 65
8 42 42 41 58 51 58 41 60 65
9 45 35 41 45 38 45 35 60 65
10 43 34 41 46 37 46 34 60 65
SF1 43 -- -- 36 -- 43 36 55 60
SF4 40 -- -- 37 -- 40 37 55 60
SF6 44 -- -- 39 -- 44 39 55 60


AUX Info :

Slot# CardType Serial# Part# Oper Admin
Status Status

Power Supply Info :

Ps#1 Status : up
Ps#1 Type : ac
Ps#1 Description : 9006AC
Ps#1 Serial Number: 11LD37592125
Ps#1 Version : 1:5000
Ps#1 Part Number : EC1405A01-E6

Ps#2 Status : up
Ps#2 Type : ac
Ps#2 Description : 9006AC
Ps#2 Serial Number: 11LD37592090
Ps#2 Version : 1:5000
Ps#2 Part Number : EC1405A01-E6

Ps#3 Status : empty


Ps#4 Status : empty

Ps#5 Status : empty

Ps#6 Status : empty

Total Power Available : 4000 watts
Total Power Usage : 2385 watts

Fan Trays Info :

Zone Info :
FRONT zone :
Mode : NORMAL
Zone Alarm Timer : 0 seconds
Mode Status : Normal
Highest Temperature : 58 C
REAR zone :
Mode : NORMAL
Zone Alarm Timer : 0 seconds
Mode Status : Normal
Highest Temperature : 44 C


Fan Info :
Tray CardType Serial# Part#
IO-FAN 1 9012FC LBNNTMC2E201EM EC1411001-E6
IO-FAN 2 9012FC LBNNTMC2E201FW EC1411001-E6
SF-FAN 1 9012SC LBNNTMC2E301R7 EC1411002-E6
SF-FAN 2 9012SC LBNNTMC2E301R1 EC1411002-E6

Zone Tray Unit Status
FRONT IO-FAN 1 1 OK
FRONT IO-FAN 1 2 OK
FRONT IO-FAN 1 3 OK
FRONT IO-FAN 1 4 OK
FRONT IO-FAN 1 5 OK
FRONT IO-FAN 1 6 OK
FRONT IO-FAN 1 7 OK
FRONT IO-FAN 1 8 OK
FRONT IO-FAN 2 1 OK
FRONT IO-FAN 2 2 OK
FRONT IO-FAN 2 3 OK
FRONT IO-FAN 2 4 OK
FRONT IO-FAN 2 5 OK
FRONT IO-FAN 2 6 OK

FRONT IO-FAN 2 7 OK
FRONT IO-FAN 2 8 OK
REAR SF-FAN 1 1 OK
REAR SF-FAN 1 2 OK
REAR SF-FAN 2 1 OK
REAR SF-FAN 2 2 OK

System Error Info :

Send Login Success Trap : false
Send Authentication Trap : false
Error Code : 0
Error Severity : 0

Port Lock Info :

Status : off
LockedPorts :

Message Control Info :

Action : suppress-msg
Control-Interval : 5

Max-msg-num : 5
Status : disable


Management Virtual IP Info :
Virtual IP : 0.0.0.0
SetMask : 0.0.0.0
VirtualMgmtMacAddr : 2c:f4:c5:92:73:fe
UDPSrc-By-VIP : false
Virtual IPv6 : 0:0:0:0:0:0:0:0/0

Configuration Operation Info :
Last Change: 0 day(s), 03:39:37
Last Vlan Change: 0 day(s), 02:23:57
Last Statistic Reset: 0 day(s), 00:00:00

VSP-9012:1(config)#


Any advice on this problem?

Thank you.

Best Regards,
Hengki
Reply With Quote
  #2  
Old 11-27-2012, 02:44 PM
lquispe lquispe is offline
Aspiring Member
 
Join Date: Nov 2012
Posts: 1
lquispe has 10 reputation points
Default

Having the same problem, does anyone have any suggestions?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:05 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.