![]() ![]() |
#1
|
|||
|
|||
![]()
If anyone can shed some light here, it would be great.
Customer has CM 6.3.11 with 9611SIP phones using 5.6 firmware. We have an on going intermittent issue. Occasionally a phone will show one or all line appearances as in use. When you push a line appearance button the phone states 'Invalid State" Tried rebooting phone, re-registering, reloading AST config. If you login a second phone it shows the same condition. Calling a phone with all line appearances in this state results in going to Voicemail. Options message in traceSm shows "Version 3 State = Full" Changing the set from 9611SIP to 9611 and back Clears the issue. |
#2
|
|||
|
|||
![]()
sounds like a firmware bug to me , have you got your cm and phones on the latest firmware and checked all the PCN documents to see if this fix is explicitly mentioned.
|
#3
|
|||
|
|||
![]()
With SIP, you also need to check that Session Manager is patched to current.
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|