![]() ![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
![]()
get to the point, I was asked to implement a switch core WoL avaya 5510 working with a stack of 7 avaya 4548 switch. My problem is being generated when in attempt to use Wol from a vlan to another vlan 99 may be the vlan 213 250 216 .... etc
does not work, you can not turn on the pc, but if I put him to an address in the same vlan, for example if both pc are ela vlan 99 where did turn on the pc I found a suggestion of Avaya, which is about creating fordwading for udp packets, but it did not work |
#2
|
|||
|
|||
![]()
As this particular forum is not set up for technical assistance, I can direct you on how to register for support via the Avaya Support Website. Create a logon ID today by navigating to the Avaya Support Website https://support.avaya.com – click on REGISTER NOW
Once registered you can utilize the site to create a Service Request for support. |
![]() |
Tags |
ers4500, ers5520, vlan, wake on lan, wol |
Thread Tools | Search this Thread |
Display Modes | |
|
|