Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Thread Tools Search this Thread Display Modes
Old 11-17-2014, 03:04 PM
hansej hansej is offline
Aspiring Member
Join Date: Sep 2011
Posts: 2
hansej has 10 reputation points
Default Attendant night service issue with VDN, Vector, and Coverage

Current version CM 6.2
Voicemail: MS Unified Messaging

When the attendant (main switchboard) is in night service mode, it points to a VDN, and vector. In the vector steps is an announcement with steps to collect digits to route-to a number with coverage. The extensions are to other department VDN's and corresponding vectors much like an auto-attendant to help with after hours calls.

Scenario 1. When the caller selects a digit from the night service vector, and the corresponding vector routes it directly to the department's station with coverage for voicemail, the caller will hear a busy signal and never gets to the departments voicemail. In this particular situation, I can see in the call trace, that it dials the station specified, but will then say "busy station" after dialing the station. Caller only hears a busy signal.

Scenario 2. When the user selects a digit from the night service vector, and the corresponding vector routes to an announcement with instructions to press "1" to leave a voicemail, the caller will be transferred to the specified station, but the caller will only hear ringing, and will never go to cover. In this particular scenario, the station actually never rings, but the caller will hear ringing.

In all three vectors, the step is route-to number with cov y

Both scenarios use the same coverage path for voicemail.
Cvg Enabled for VDN Route-To Party is set to yes.
Coverage point is to a hunt group.

It appears that the call never gets to it's destination, and I can't tell from the traces where its going. At first I thought this was a double coverage issue, but I don't think so. I should also note, that the two scenarios work as they should when not going through the night service mode.

Let me know what additional information would be helpful.

Any suggestions would be appreciated.


Reply With Quote
Old 07-02-2015, 04:49 AM
anilkumark anilkumark is offline
Join Date: Oct 2013
Posts: 7
anilkumark has 10 reputation points

It is suggested to use Messaging Step in Vector rather than Route-to and you can check the issue.
Reply With Quote

coverage, night service, vdn, vector

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 12:24 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.