![]() ![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
![]()
I have set up an IPphone and an android with the One-x mobile lite and both are working fine. Have a new user who also has an Android (Samsung Galaxy S5) and I am having several issues. Calls are forwarding to the cell phone even though we did not turn on simultaneous ring on the cell. I have tried disabling the simultaneous ring, that does not work. In addition, I cannot call an internal ext from the one-x mobile on the cell phone. I traced the uext and the result is below. Please note that I altered the calling number and the called number to protect the innocent. Also, the android that works is using AT&T and the one that does not is using Verizon. Any suggestions would be much appreciated. thanx, bj.
![]() VTN 104 1 06 16 KEY 0 SCR ACTIVE VTN 104 1 06 16 ORIG TN 055 01 IPMG 016 0 V PHYSICAL TN 000 0 00 00 DID RMBR 12 1 INCOMING TRUNK CALL UEXT VTN 104 1 06 16 TERM NONE TDTN 138 SLOT 0 22 PTY SLOT 0 27 DIAL DN 305 MAIN_PM REOR TALKSLOT NONE QUEU DIAL CALL ID 0 10370 ---- ISDN PRA CALL (ORIG) ---- CALL REF # = 29586 BEARER CAP = VOICE HLC = CALL STATE = 10 ACTIVE CALLING NO = 217xxxxxxx NUM_PLAN:E164 TON:NATIONAL ESN:NPA CALLED NO = 391xxxx NUM_PLAN:E164 TON:SUBSCRIBER ESN:NXX PDCA 1 PAD 0 0 PCML MU MU KEY 1 HOT IDLE KEY 2 NUL IDLE KEY 3 NUL IDLE KEY 4 NUL IDLE KEY 5 NUL IDLE KEY 6 NUL IDLE KEY 7 NUL IDLE KEY 8 NUL IDLE KEY 9 NUL IDLE KEY 10 NUL IDLE KEY 11 NUL IDLE KEY 12 NUL IDLE KEY 13 NUL IDLE KEY 14 NUL IDLE KEY 15 NUL IDLE KEY 16 NUL IDLE KEY 17 TRN IDLE KEY 18 AO6 IDLE KEY 19 CFW IDLE KEY 20 RGA IDLE KEY 21 PRK IDLE KEY 22 RNP IDLE KEY 23 NUL IDLE KEY 24 PRS IDLE KEY 25 CHG IDLE KEY 26 CPN IDLE KEY 27 NUL IDLE KEY 28 NUL IDLE KEY 29 NUL IDLE KEY 30 NUL IDLE KEY 31 NUL IDLE |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|