Authorization Code Permissions

[silva139]

I wanna block the communication of a Authorization code vs COR(of trunk-group) not using FRL analysis, i don't know if there is a way to block the Auth-Code on the cor.

In example i wanna use separete Authorization Code between locations and in the case of a user visit another location an use the Authorization Code of his own location doesn't work on this new location.

You have any Ideas?

[mskinner]

Authorization codes only work when going through ARS or AAR. They do not work between locations within a single CM.

[silva139]

Originally Posted by mskinner

Authorization codes only work when going through ARS or AAR. They do not work between locations within a single CM.

We are using ARS table where the call route to the PSTN.

Now on another Avaya Aura Communication Manager on the COR configuration i have 33 pages an the last pages it display a fields AUTHORIZATION CODE PERMISSIONS do you know how to enable this fields on the cor?

[rvengco]

Hi Silva139,

In order for you to enable AUTHORIZATION CODE PERMISSIONS for COR , you need to enable the green feature or special application SA8517
You can do command "change system-parameters special-applications" and on page 4 look for below and enable it

(SA8517) - Authorization Code By COR? y

This will enable your AUTHORIZATION CODE PERMISSIONS in the COR.

Hope this helps.

[chang108]

how do I set authorization codes to work only during working hours eg. 08.00am to 17.30pm. Thank you for your help.