J179 Telephones

[brookj]

Do any programmers know how to change the 4 softkeys below the display of a J179 SIP phone on an Avaya Aura CM?

[navar126]

I am not a programmer but we recently got our system installed last summer and this question was brought up to him at the time.

Basically he said that because this is all hard coded on the phones they cant customize the labels or whatever actions the soft keys might indicate.

[curibe]

Originally Posted by brookj

Do any programmers know how to change the 4 softkeys below the display of a J179 SIP phone on an Avaya Aura CM?

to change this bottom you should modificate the 46xxsetting,

example.

## SIGNALING
SET PHONEKEY "Key=4;Type=feature;Name=agnt-login"
SET PHONEKEY "Key=5;Type=feature;Name=auto-in;attr1="
SET PHONEKEY "Key=6;Type=feature;Name=aux-work;attr1="
SET PHONEKEY "Key=7;Type=autodial;Name=after-call;attr1="
SET PHONEKEY "Key=8;Type=autodial;Name=Logout;attr1=*85"
ADD SOFTKEY_ACTIVE "type=dial;action=*84;label=Login"
ADD SOFTKEY_ACTIVE "type=dial;action=*82;label=auto-in"
ADD SOFTKEY_ACTIVE "type=dial;action=*83;label=aux-work"
ADD SOFTKEY_ACTIVE "type=dial;action=*80;label=after-call"
ADD SOFTKEY_ACTIVE "type=dial;action=*85;label=Logout"
ADD SOFTKEY_ACTIVE "type=function;action=endcall;Label=Drop"
ADD SOFTKEY_IDLE "type=dial;action=*84;label=Login"
ADD SOFTKEY_IDLE "type=dial;action=*82;label=auto-in"
ADD SOFTKEY_IDLE "type=dial;action=*83;label=aux-work"
ADD SOFTKEY_IDLE "type=dial;action=*80;label=after-call"
ADD SOFTKEY_IDLE "type=dial;action=*85;label=Logout"
ADD SOFTKEY_IDLE "type=function;action=endcall;Label=Drop"

goodbye you welcome.