DS30B Port 6 Issue

[hagerp]

Having a very strange issue....

On IP500 DS30 B modules - when connected to R11.1.2.1.0 Build 3 to R10 Control Unit test fine except port 6.

The powers up but the LED on port 6 goes solid, then goes out and starts to blink. This just repeats and the phone does not work. I've used multiple 1408/16's and different IPO's with R11.

Tried downgrading to R9 CU and it works fine ... back up to the R11.1 CU and port 6 always fails -

Multiple DS30B

Any ideas?

Thanks!

[walshn]

I have not heard of this issue I took a quick look through database and nobody has reported it either. If I find something about I will update post.