help setup 9630

[ander208]

my 9630 dont have an server to connect any more,
and 73738#, 27238#, # Are only restarting. can not edit the settings
When i start it, it onlu writing:

__________________________
|                        |
|  Discover 10.100.0.15  |
|                        |
|  |||| ||||  |||| ||||  |

NEXT SCREEN

__________________________
|                        |
|  Discover 10.100.0.4   |
|                        |
|  |||| ||||  |||| ||||  |

NEXT SCREEN

__________________________
|                        |
|  Discover 10.100.0.6   |
|                        |
|  |||| ||||  |||| ||||  |

NEXT SCREEN

__________________________
|                        |
|  Discover 10.100.0.18  |
|                        |
|  |||| ||||  |||| ||||  |

Can i set an ftp / http server to reed in the settings to the phone?
And if yes then witch settings to set the phone
to call to my "linksys pap2t (ip: "10.0.0.13:5060" dial nr "622")"

Pleace help me.

[rvengco]

Hi Ander208,
What do you mean call to your "linksys pap2t (ip: "10.0.0.13:5060" dial nr "622")"?

Is this H.323 phone and trying to register to CLAN/PROCR? if yes try to use "Mute" + 27238# (CRAFT#) and try to change your settings there.

Also if it can't register to the CLAN, check the VLAN assigned to the phone if they were configured to be able to communicate to the CLAN/PROCR IP address

[ander208]

Originally Posted by rvengco

Hi Ander208,
What do you mean call to your "linksys pap2t (ip: "10.0.0.13:5060" dial nr "622")"?

Is this H.323 phone and trying to register to CLAN/PROCR? if yes try to use "Mute" + 27238# (CRAFT#) and try to change your settings there.

Also if it can't register to the CLAN, check the VLAN assigned to the phone if they were configured to be able to communicate to the CLAN/PROCR IP address

When i dial 622 i want it to call to my "linksys pap2t"
and if i dial 631 on my "linksys pap2t" it shall call my avaya 9630

have tryed 73738#, 27238#, # but they only restarting the unit