Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-23-2013, 02:54 PM
ahartoch ahartoch is offline
Guru
 
Join Date: Aug 2010
Location: Barcelona
Posts: 122
ahartoch has 10 reputation points
Default Change CLID for outgoing calls

Hi,

I would like to know, if it's possible within CM to use a prefix to be able to change the CLID when making outbound calls. I've learned this is possible in CS1K. This feature is specially useful in Call Centers where an agent might be be serving different campaigns, but would like to show a different CLIDS when making outbound calls for different campaings.

Thanks,
Alex
Reply With Quote
  #2  
Old 01-24-2013, 08:08 AM
mskinner mskinner is offline
Genius
.
 
Join Date: May 2010
Posts: 209
mskinner has 11 reputation points
Default

With Communication Manager, an end user cannot change their Caller ID. What is sent out of CM is determined by what is administered on the "public-unknown-numbering" table.
Reply With Quote
  #3  
Old 06-17-2014, 10:25 AM
marzahn's Avatar
marzahn marzahn is offline
Genius
 
Join Date: May 2014
Location: Among the trees in Western RI
Posts: 236
marzahn has 24 reputation pointsmarzahn has 24 reputation points
Exclamation

I believe I have found the right thread for this question. We have a requirement for a single station to out pulse a specific number with each call. I already use the public unknown table (PUT) to send out our main listed number (MLN) with all calls.
So far I have tried several digit strings including . . .

Ext__Ext___Trk____CPN____________CPN
Len__Code__Grp(s) Prefix_________Len
4... 1234........ 4011234567.... 10
4... 1234........ 401123........ 10


But the out pulse is appearently taken from the trunk group (TG) previously set up in the PUT with the MLN. Any thoughts?
__________________
Thank you,
Bill Marzahn
Telecommunications Administrator
Neighborhood Health Plan of Rhode Island
299 Promenade Street
Providence, RI 02908-5720
401-459-6677 (Direct "Find-me" Line)
Reply With Quote
  #4  
Old 06-26-2014, 09:36 AM
richa164 richa164 is offline
Guru
 
Join Date: Oct 2013
Posts: 131
richa164 has 23 reputation pointsricha164 has 23 reputation points
Default

Need more info ,

What hardware and cm version are you on , also what type of trunks
Reply With Quote
  #5  
Old 07-01-2014, 09:16 AM
ahinge ahinge is offline
Aspiring Member
 
Join Date: Jul 2014
Posts: 2
ahinge has 10 reputation points
Default

n trunks check what type of format is used: Public or private

According change the private-numbering/public-unknown-numbering & change the below:

Ext Ext Trk CPN CPN
Len Code Grp(s) Prefix Len
Total Administered: 36
Reply With Quote
  #6  
Old 07-02-2014, 09:41 AM
marzahn's Avatar
marzahn marzahn is offline
Genius
 
Join Date: May 2014
Location: Among the trees in Western RI
Posts: 236
marzahn has 24 reputation pointsmarzahn has 24 reputation points
Solution Delivered

I worked out the solution for this. So I thought that I would share. First of all this is a CM 5.2 system. It should work for many earlier CM revs. The requirement for this request was:

An auditor wants to test medical providers as to their comfort level with participating in medical fraud and/or abuse of current law. This person wants to prevent the provider from learning that he or she is speaking with an insurance company.

The system requirements included both inbound and outbound routing enforcement. This is due to the requirements for invisibility for the auditor and for dial in failure by the called party. There may be other ways to do this. However this is how I built the solution:

The Switch Elements Required for this Solution
1 Station “add station 8838”
1 Uniform Dial Plan Table (UDP) entry “change uniform-dialplan 1”
1 AAR Digit Analysis Table entry “change aar analysis 1”
1 Route Pattern (RP) entry “change route-pattern 12”
1 Trunk Group (TG) “add trunk-group 7”
1 Class of Restriction (COR) “change cor 59”
1 Numbering - Public/Unknown Format entry “change public-unknown-numbering 0”

I first created a new trunk group (TG). Here are the important elements in its configuration.

TRUNK GROUP

Group Number: 7 Group Type: isdn CDR Reports: y
Group Name: Auditor COR: 59 TN: 1 TAC: 5807
Direction: outgoing Outgoing Display? n Carrier Medium: PRI/BRI
Dial Access? n Busy Threshold: 255
Queue Length: 0
Service Type: public-ntwrk
On page 5 I set up one port on an ISDN/PRI DS1 board for use by this one station

Next I created a new class of restriction (COR). Let’s say that it is 59. This COR will route calls from the auditor’s phone by way of the new TG.

change cor 59
CLASS OF RESTRICTION

COR Number: 99
COR Description: Investigation Line F06

FRL: 6 APLT? y
Can Be Service Observed? y Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Time of Day Chart: 5 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: all Facility Access Trunk Test? y
Restricted Call List? n Can Change Coverage? n

Access to MCT? y Fully Restricted Service? n
Group II Category For MFC: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n Add/Remove Agent Skills? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? N

I set the facility restriction level (FRL) index to a 6 so that the auditor could call virtually anywhere. I am not concerned with abuse of this number at I have call accounting to monitor its use. I left the ability to call everyone on the restriction pages.

Station Requirements
There were two requirements in the station configuration:
On tab 1, the COR is set to: “59.”
On tab 2, the Per Station CPN - Send Calling Number is set to “y.”

Uniform Dial Plan Table (UDP) Entry
change uniform-dialplan 1
UNIFORM DIAL PLAN TABLE

Matching Insert Node
Pattern Len Del Digits Net Conv Num

8838 4 0 338 aar n

AAR Digit Analysis Table Entry

change aar analysis 1 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Location: all Percent Full: 1

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
338 7 7 12 aar n

Route Pattern (RP) Entry

change route-pattern 12
Pattern Number: 12 Pattern Name: CLM Ivst8838 F0
SCCAN? n Secure SIP? n
Grp FRL NPA Pfx Hop Toll No. Inserted DCS/ IXC
No Mrk Lmt List Del Digits QSIG
Dgts Intw
1: 7 0 401 1 3 8838 n user



Public Unknown Table Entry

change public-unknown-numbering 0
NUMBERING - PUBLIC/UNKNOWN FORMAT
Total
Ext Ext Trk CPN CPN
Len Code Grp(s) Prefix Len

4 8838 7 401427 10

Result
The result is a number sent out with these calls that cannot be dialed by the provider. The message produced by a call to this number is: “The number you have dialed is not in service. Please check the number and try your call again.”
__________________
Thank you,
Bill Marzahn
Telecommunications Administrator
Neighborhood Health Plan of Rhode Island
299 Promenade Street
Providence, RI 02908-5720
401-459-6677 (Direct "Find-me" Line)
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:42 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.