Greetings and calling all Gurus!!

[perfed]

Greetings and calling all Gurus!!

I am connecting an IP Office to an NEC sv8100 via Sip trunks. I can call to the NEC and connect all day. Calling to the IPO from the NEC I get this on monitor:


148046mS CMCallEvt: 0.1009.0 -1 BaseEP: NEW CMEndpoint fe7b87e8 TOTAL NOW=1 CALL_LIST=0
148047mS Stun: Info: media ports will not be mapped with STUN.
148047mS Sip: License, Valid 1, Available 65535, Consumed 0
148051mS SIP Tx: TCP 192.168.3.25:5060 -> 192.168.3.26:48968
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 192.168.3.26:5060;branch=z9hG4bKC6F3A7B949B9527B
From: "4603" <sip:4603@192.168.3.26>;tag=27B1324631353641000237 2B
To: <sip:4650@192.168.3.25:5060>;tag=bb0faeed1d17e4b 1
Call-ID: 020AC224618140000000002E@192.168.3.26
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0

148054mS Sip: 15.1009.1 -1 SIPTrunk Endpoint(fe7b782c) Present Call, no match (4650) from URI in To header or (4650) from request URI
148056mS SIP Tx: TCP 192.168.3.25:5060 -> 192.168.3.26:48968
SIP/2.0 404 Not Found
Via: SIP/2.0/TCP 192.168.3.26:5060;branch=z9hG4bKC6F3A7B949B9527B
From: "4603" <sip:4603@192.168.3.26>;tag=27B1324631353641000237 2B
To: <sip:4650@192.168.3.25:5060>;tag=bb0faeed1d17e4b 1
Call-ID: 020AC224618140000000002E@192.168.3.26
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0


Where I placed the faces is where it is going wrong.

Any ideas would be appreciated.!!

Thanks/Quaz

[furrerm]

Do you have an incoming call route for 4650, to route to an extension (assuming extension 4650)?

this is a QSIG trunk, so you need to manually create the routing for in and outbound.

[perfed]

Right you are! When I created an incoming route, I could complete calls.
Thank you for your response and help.

Quaz

[haddo4]

Can you share your notes on creating the IP Office side to NEC please?