Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-13-2012, 01:03 PM
saad2 saad2 is offline
Member
 
Join Date: Mar 2012
Posts: 5
saad2 has 10 reputation points
Default 96xx seires in VPN mode

dear all,

any body make the configuration for 96xx series on vpn mode ... beacuse i need to make this solution but i need more detials about this .....

if any one have idea according to this please send it to me ..

haitham saad
00966563645755
h.saad@bmc.com.sa
Reply With Quote
  #2  
Old 04-16-2012, 02:51 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Default 96xx VPN mode

Hi Haitham,

What exactly are you looking for?
To setup the VPN, you will need:

1) 96xx FW that supports VPN
2) VPN details (such as server IP, authentication method, etc...)
3) 46xxsettings.txt file with the VPN settings

Below document contains details that will help you start:

VPN Setup Guide for 9600 Series IP Telephones Release 3.1
http://support.avaya.com/css/P8/documents/100068662
16-602968 Issue 1 November 2009



As of Release 6.2, you can download an application file from the Avaya Support Web site that does not support VPN or media encryption
http://support.avaya.com/css/P8/documents/100157597 (Page 37)
Avaya one-X® Deskphone H.323 9608, 9611G, 9621G, and 9641G Administrator Guide Release 6.2 16-300698 Issue 10 February 2012


Hope this helps.
Arbi
Reply With Quote
  #3  
Old 04-16-2012, 03:03 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Default VPN SETTINGS in 46xxsettings.txt file

You can download the latest 46xxsettings.txt file from:
http://support.avaya.com/css/appmana...72125345#files

IMPORTANT: There are TWO 46xxsettings.txt files for these products. Make sure you download and use the correct file for your product and release.

This link is to the file directly for
  • 96x1 telephone H.323 software release 6.2
  • 96x1 telephone SIP software release 6.0 SP3
  • 96x0 telephone H.323 software release 3.1 SP4
  • 96x0 telephone SIP software release 2.6 SP7
  • 46xx telephone H.323 software release 2.9 SP2
  • 46xx telephone SIP software release 2.2.2
  • 364x telephone SIP software release 1.0
  • 3631 telephone H.323 software release 1.3.0
  • 16xx telephone H.323 software release 1.3
  • 16CC telephone SIP software release 1.0
  • 1603 telephone SIP software release 1.0
  • 1692 telephone H.323 software release 1.4
  • Softphone SIP software release 2.1
ftp://ftp.avaya.com/incoming/Up1cku9...xxsettings.txt


Below is a brief list of the VPN settings extracted from the 46xxsettings.txt file.

####################### VPN SETTINGS #########################
##
## SET NVVPNMODE 1
## SET DHCPSRVR 192.168.16.2
## SET NVVPNCFGPROF 0
## SET NVIKECONFIGMODE 1
## SET NVIKEXCHGMODE 1
## SET NVIKEXCHGMODE 2
## SET NVIKECONFIGMODE 1
## SET NVVPNAUTHTYPE 3
## SET NVSGIP "10.1.1.1"
## SET NVVPNUSER %MACADDR%
## SET NVVPNPSWDTYPE 1
## SET NVVPNCOPYTOS 2
## SET NVVPNENCAPS 0
## SET NVIKEPSK "abc1234"
## SET NVIKEID "VPNPHONE"
## SET NVIKEIDTYPE 3
## SET NVIPSECSUBNET "0.0.0.0/0"
## SET NVIKEDHGRP 2
## SET NVPFSDHGRP 0
## SET NVIKEP1ENCALG 0
## SET NVIKEP2ENCALG 0
## SET NVIKEP1AUTHALG 0
## SET NVIKEP2AUTHALG 0
## SET NORTELAUTH 1
## SET NVXAUTH 1
## SET RINGPRIORITY 3
## SET VPNPROC 1
## SET ALWCLRNOTIFY 0
## SET DROPCLEAR 1
## SET NVMCIPADD "0.0.0.0"
## SET NVHTTPSRVR "0.0.0.0"
## SET NVTLSSRVR "0.0.0.0"
## SET NVIKEOVERTCP 0
## SET NVIKEP2LIFESEC 432000
## SET NVVPNPSWD ""
## SET NVVPNSVENDOR 4
## SET NVVPNUSERTYPE 1
## SET VPNTTS 0


Telephones will attempt to establish a VPN connection only if the system parameter NVVPNMODE is set to "1" (Enabled). You can choose to permit your end users to change this value if a remote telephone will also be used within the enterprise environment. By enabling the NVVPNMODE, you will be able to configure the parameters of the VPN right on the phone itself (for testing purpose).


Arbi
Reply With Quote
  #4  
Old 06-22-2012, 07:09 AM
mmajbo mmajbo is offline
Aspiring Member
 
Join Date: Jun 2012
Posts: 2
mmajbo has 10 reputation points
Default VPN configured but not working

Guys, i have been trying to configure 9630 as a VPN phone and it is giving me a lot of grief.
i am at a point were i can see the phone establish VPN tunnels, obtian an IP address on the private network, but it hangs on the contacting the call server step.
This is because the phone gets the IP address on the private network but for whatever reason subnet mask and router are not updated and i still see values for the local router and subnet mask that i punched in the phone to make it connect to network.

Thnx for any help!
Reply With Quote
  #5  
Old 06-22-2012, 12:42 PM
mmajbo mmajbo is offline
Aspiring Member
 
Join Date: Jun 2012
Posts: 2
mmajbo has 10 reputation points
Default Can't get the complete IP address from VPN

If anyone has an idea how to fix that please let me know:

I enter local IP address, sub, router and file server on the phone
Phone conects to file server and grabs the config file
Next step is VPN tunnel and authentication which goes fine
Phone starts to contact call server and just stays here

When i go to CRAFT and check settings i see that all IP inofrmation i entered manually gets passed as enternal IP information, but on the internal side only IP address is updated form VPN to represent conrporate network but subnet mask and router stay the same as they were entered manually and are not updated and this of course makes it impossible for the phone to comunicate wioth corporate call servers.

Any ideas?
Reply With Quote
  #6  
Old 07-12-2012, 04:25 PM
narias narias is offline
Aspiring Member
 
Join Date: Jul 2012
Posts: 1
narias has 10 reputation points
Default Vpn settings on an ip phone 9640

Hi, I have the same problem with the firmware on an IP phone 9640. The firmware is already uploaded on it ( s3.186a version) ,but the issue is that the system on the phone do not allow me to make any change, it shows the VPN settngs on disable and i`m not able to enable it....what should i do to be able to enable it?
please send me an answer to the mail nancy.arias@tecprotel.com.mx
Reply With Quote
  #7  
Old 04-05-2013, 11:41 AM
macosx2new macosx2new is offline
Member
 
Join Date: May 2012
Posts: 8
macosx2new has 10 reputation points
Question NVVPNUSER in 46xxsetting file

My environment:
CM 6.0.1
IP phone 9611G ver: 6.23.12
H323
Cisco ASA 55XX.

I got most of VPN configuration fingured out. But one question remaining, regarding NVVPNUSER that contains the string $MACADDR. For the life of me, I could not make the string will be replaced by the telephone's MAC address.

Any though of using IF statement to archive the goal? to stage the phone and it may be preconfigured in a file to eliminate the need for the user to manually enter the value.

Much appreciated to shed some light.

Kevin
Reply With Quote
  #8  
Old 06-13-2014, 05:15 AM
tripathi1 tripathi1 is offline
Hot Shot
.
 
Join Date: Jun 2014
Posts: 10
tripathi1 has 10 reputation points
Default VPN configured but not working

Dear mmajb,

Are you using ip address in range 10.0.0.x /24 in the private side of your network ?

There is a known issue observed which is fixed in firmware 3.2.0.5.

Upgrade your 9630 phones to minimum 3.2.0.5 or latest.

If the issue still persists then open an SR with Avaya to investigate further
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:31 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.