![]() ![]() |
#11
|
|||
|
|||
![]() Quote:
Anyway I'm going to doublecheck your suggestions. I appreciate your help! Last edited by jtarjanyi; 07-06-2016 at 12:17 PM. |
#12
|
|||
|
|||
![]()
=> Which was the IPOCC version from which you upgraded ?
New installation of 9.1.7 => Seems the network connection between IPO and IPOCC is going up/down, or the IPO Web Manager is going up/down. That is reflected as "connect timed out" in logs. This needs to be corrected. Can you please check the state of WebManager in IPO. You can view service state on IPO dashboard (port 7071). uptime: 25 day, so it is runnig. => Can you please check IPO Sync Service Configuration. If earlier this was working well, this should be correct, unless someone changed the credentials at IPO end. The configuration is under PBX -> PBXServer -> Conf Access. Please verify the credentials. The port should be 7070 in case of IPO Server edition. Initial configuration, and Anget in IPO are created by the sync, so I think is OK. |
#13
|
|||
|
|||
![]()
Is the syncronization using IPO UserRight ?
I saw this in the log: G7809a 23:56:27.247 TC_General Initializing Sync cache and updating map with all agents fetched from IPOCC DB G7810a 23:56:27.247 TC_General +++++Setting default User rights G7812a 23:56:27.975 TC_General User right Name :IP Hardphone G7813a 23:56:27.975 TC_General User right Name :Application G7825a 23:56:31.280 TC_General User rights updated successfully |
#14
|
|||
|
|||
![]()
HI , as you mentioned you install IPOCC 9.1.7 you should need to use same name (spelling of agents) in ipocc and ipo both.
![]() |
#15
|
|||
|
|||
![]()
I did not administered Agnets in IPO, just let the Syncronization to do that.
|
#16
|
|||
|
|||
![]() Quote:
Last edited by schopdekar; 07-07-2016 at 03:50 AM. |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|