Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-05-2014, 06:48 PM
gsorza gsorza is offline
Aspiring Member
 
Join Date: Feb 2014
Posts: 2
gsorza has 10 reputation points
Default Sip Server

I have a combined Home/edge server. Avaya G450 S8300D SES. It seems that the ACM and the SES are not communicating completely. I can NOT dial sip to sip nor H.323 to Sip. I can call out sip to H.323.
The problem has come up and I do not know which test to run. I have tried list trace tac - List trace station - and I have some logs on the sip server. If I do a status station in ASA it shows Off PBX Service State: In-service/Idle and In-service/ active when ringing.
I am able to call a sip extension and it will ring the sip extension I will go off hook on the sip extn and it will stop ringing called sip extn and I hear a stuttered dial tone - but the calling party continues to hear ringing. When I go off hook and hear stutter dial tone-- and I dial any digit on the dialpad it will connect me to the caller and work. If I simply go off hook and wait the call continues on its coverage path and the next station rings.
When I look at the Sip trace log I can see that two Bye messages are exchanged and the call rings the next phone in cover path ( when I just go off hook). If I dial a digit than it shows up as a second ack message and all other notify messages.
It seemed to happen all of a sudden. They also have a VPN between sites cisco 5505 to Cisco 5520. I would appreciate any help in call flow of a sip phone to sip phone call. Also any test to determine the culprit is it the ACM or is it the Sip enablement Server.
I was able to make a sip call to external IPO and the call connected. SIP TRACE LOG SHOWS 2 DIFFERENCES ON THE (Recv Request) Invite the non working has a line below History info named Accept-Contact: *;+avaya-CM-line=1 ( What is this line all about)
Rcvd Request Ack the to: "xxxx"shows the ip address of the sip phone after the tag=**************_T10.x.x.x ( Assume trusted site cause of the T )
Record Route: <sip:x.x.x.x:5061; Transport=tls; lr> The call that worked does not show the Transport=tls it just shows lr> at the end.

Last edited by gsorza; 02-11-2014 at 01:21 PM. Reason: Correction to sip trace log
Reply With Quote
  #2  
Old 02-13-2014, 05:01 PM
gsorza gsorza is offline
Aspiring Member
 
Join Date: Feb 2014
Posts: 2
gsorza has 10 reputation points
Solution Confirmed Wrong Title: Should be Off-Pbx-Tel Config set

The trouble found the ACM. The off-pbx-telephone-config-set changed a setting to No and it solved the problem. The setting is : Confirmed Answer = No

Last edited by gsorza; 02-13-2014 at 05:05 PM.
Reply With Quote
  #3  
Old 02-14-2014, 03:33 PM
rbrookes's Avatar
rbrookes rbrookes is offline
Guru
.
 
Join Date: Jan 2012
Location: rbrookes@avaya.com
Posts: 141
rbrookes has 10 reputation points
Default

Thanks gsorza for posting the resolution.
__________________
Russ Brookes | Avaya, KCS Leader | +1 613.771.7590 | rbrookes@avaya.com | NA Eastern Time Zone
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 03:05 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.