Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Thread Tools Search this Thread Display Modes
Old 04-20-2015, 08:25 AM
wilso251 wilso251 is offline
Aspiring Member
Join Date: Apr 2015
Posts: 1
wilso251 has 10 reputation points
Default Sessoin Manager 6.3, CM 6.3, SpectraLink 8440, and an FX paging trunk

Having an odd issue here with a paging trunk and some 8400's. Basically the 8400 is able to dial the TAC and we hear over head the paging tone play. On the Spectralink side however we only hear continuous ring back? Curious if someone has some insight. Trunk configs below

Group Number: 160 Group Type: fx CDR Reports: y
Group Name: Paging BHU C-level COR: 62 TN: 1 TAC: 8160
Direction: outgoing Outgoing Display? y
Dial Access? y Busy Threshold: 255
Queue Length: 0 Country: 1
Comm Type: voice Digit Absorption List:
Prefix-1? y Trunk Flash? n Toll Restricted? n

Trunk Type: loop-start


Outgoing Dial Type: automatic
Trunk Termination: 600ohm Disconnect Timing(msec): 500

Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Analog Loss Group: 6 Digital Loss Group: 11
Trunk Gain: high

Disconnect Supervision - Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? y
Administer Timers? y
XOIP Treatment: auto

Group Number: 150 Group Type: sip CDR Reports: y
Group Name: Session Manager COR: 90 TN: 1 TAC: 0150
Direction: two-way Outgoing Display? n
Dial Access? n Night Service:
Queue Length: 0
Service Type: tie Auth Code? n
Member Assignment Method: auto
Signaling Group: 150
Number of Members: 100


Unicode Name: auto

Redirect On OPTIM Failure: 5000

SCCAN? n Digital Loss Group: 18
Preferred Minimum Session Refresh Interval(sec): 600

Disconnect Supervision - In? y Out? y

XOIP Treatment: auto Delay Call Setup When Accessed Via IGAR? n

ACA Assignment? n Measured: both
Maintenance Tests? y

Numbering Format: private
UUI Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n

Modify Tandem Calling Number: no

Show ANSWERED BY on Display? y


Mark Users as Phone? n
Prepend '+' to Calling/Alerting/Diverting/Connected Number? n
Send Transferring Party Information? n
Network Call Redirection? n

Send Diversion Header? n
Support Request History? n
Telephone Event Payload Type:

Convert 180 to 183 for Early Media? n
Always Use re-INVITE for Display Updates? n
Identity for Calling Party Display: P-Asserted-Identity
Block Sending Calling Party Location in INVITE? n
Accept Redirect to Blank User Destination? n
Enable Q-SIP? n

Interworking of ISDN Clearing with In-Band Tones: keep-channel-active
Reply With Quote
Old 07-01-2015, 03:01 AM
kotharin kotharin is offline
Aspiring Member
Join Date: Jul 2015
Posts: 4
kotharin has 10 reputation points


Did you get a chance to check the list trace and see if the call is getting connected?
Also, what does Spectralink is showing on their side, do they see call coming in?

Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 07:58 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.