Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-12-2010, 01:31 AM
pttrung pttrung is offline
Aspiring Member
 
Join Date: Aug 2010
Posts: 1
pttrung has 10 reputation points
Exclamation error boot image for SR2330

Dear all!

I have Nortel SR2330 and I had format the flash cf0 using the command, now I canít open my router these is the error:

Press any key to stop auto-boot...

Compact Flash Device: CF0, Filename: /cf0//SR2330.Z


Cannot open "/cf0//SR2330.Z".


Error loading package: errno = 0x380003.

Can't load boot file!!




I had use boot from ftp but can't:


Can you explain about command line as:
[BOOT]:
[00] Boot dev : ftp
[01] Boot Ethernet Port : 1
[02] Boot file name : SR2330.Z
[03] Server name : host
[04] Server IP address : 192.168.24.1
[05] My IP address : 192.168.24.10
[06] My subnet mask : 255.255.255.0
[07] Gateway IP address : 192.168.24.254
[08] User name : demo
[09] Password : wind
[10] Checksum enable [0isable,1:Enable]: 1
[11] Show header enable [0isable,1:Enable]: 0
[12] Save bootrom image [0:AutoUpdate,1:NormalBTupd,2:GoldenBTupd,3:NoUpd]: 1
[13] display mode [0:minimum,1:maximum]: 0

I canít boot from ftp server. I had setup network card my PC: 192.168.24.1 255.255.255.0 and from my PC, I can ping to port Ethernet 0/1 with IPís SR2330: 192.168.24.10

C:\Users\Thanh Trung>ping 192.168.24.10
Pinging 192.168.24.10 with 32 bytes of data:
Reply from 192.168.24.10: bytes=32 time<1ms TTL=64
Reply from 192.168.24.10: bytes=32 time<1ms TTL=64
Reply from 192.168.24.10: bytes=32 time<1ms TTL=64
Reply from 192.168.24.10: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.24.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

but error:

Copyright (c) 2009 Nortel

PROCESSOR : MPC8347 TBG
SYSTEM MEMORY : 1G
VxWorks : VxWorks5.5.1
BSP version : 1.1/0
Boot version : 0.0.0.32 (NORMAL Boot)
Creation date : Aug 18 2009, 17:47:46
NORMAL Bt ver : 0.0.0.32
GOLDEN Bt ver : 0.0.0.32
Baseline ver : 0.0.0.32 (Internal version for checking)
System name : SR 2330




Press any key to stop auto-boot...
MAC 98:d8:8c:fb:02:01
Attached IPv4 interface to mottsec unit 1
Loading...

Error loading file: errno = 0x3c.
Check your network configuration
Can't load boot file!!
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:02 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is ďAS ISĒ and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.