Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-30-2015, 07:42 AM
meyer84 meyer84 is offline
Member
 
Join Date: Jul 2013
Posts: 8
meyer84 has 10 reputation points
Default SIP Incoming TCP Needs to be UDP

I have a CM 6.3 and SM 6.3. I am testing a SIP device that registers to the SM via UDP port 5060. I am able to make outbound calls. Whenever I try to make an inbound call the call is rejected. When I trace the incoming call it is being made via TCP not UDP. The SIP device I have only does UDP so it does not recognize the TCP call. How can I make inbound calls to the device via UDP?
Reply With Quote
  #2  
Old 12-01-2015, 09:04 AM
zakabog zakabog is offline
Genius
 
Join Date: Aug 2014
Posts: 300
zakabog has 25 to 49 reputation pointszakabog has 25 to 49 reputation pointszakabog has 25 to 49 reputation points
Default

Is the CM placing the SIP call directly to your device? As long as your Session Manager is configured to send outgoing calls via UDP, and the CM is sending the TCP call to the SM, then your call should go out to the SIP device using UDP.
Reply With Quote
  #3  
Old 12-02-2015, 05:53 AM
meyer84 meyer84 is offline
Member
 
Join Date: Jul 2013
Posts: 8
meyer84 has 10 reputation points
Default

That was also my understanding. But the SM is sending TCP packets not UDP
Reply With Quote
  #4  
Old 12-02-2015, 09:07 AM
derekf derekf is offline
Whiz
 
Join Date: Nov 2015
Posts: 26
derekf has 14 reputation pointsderekf has 14 reputation points
Default

The SM should be sending TCP to CM and UDP to the endpoint if the endpoint registered to SM using UDP. Any chance you can grab a traceSM trace from SM and post it?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:16 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.