Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-19-2016, 04:40 AM
jones683 jones683 is offline
Member
 
Join Date: Jul 2016
Posts: 3
jones683 has 10 reputation points
Question redirected outbound calls with no cli

Hello fellow Avaya users

I have a scenario I hoped someone may have experience with and could shed some light.

Aura 6.2 solution, with SM, SMGR and ASBC

Scenario: Sip trunks - Incoming call with anonymous CLI hits a handset that redirects the call off net either via EC500 or call forwarding. As the CLI is anonymous the sip provider is rejecting the call. Obviously this also occurs on rerouted Vector calls.

So I'm looking for a solution that injects a CLI for anonymous inbound calls that are then rerouted back out. I'm using a workaround for redirected numbers by adding some adaptations on SM but cant see how I can make an adaption on SM for anonymous numbers. Maybe there is somewhere on ASBC whereby I can make an adaption.

I can see trunk settings on CM that I've shown below, I've played around with these settings but this has had no success.

PROTOCOL VARIATIONS (page 4 trunk 1)

Mark Users as Phone? n
Prepend '+' to Calling Number? y
Send Transferring Party Information? y
Network Call Redirection? y

Send Diversion Header? y
Support Request History? n
Telephone Event Payload Type: 127


Convert 180 to 183 for Early Media? n
Always Use re-INVITE for Display Updates? n
Identity for Calling Party Display: From
Block Sending Calling Party Location in INVITE? y
Enable Q-SIP? N

Does anyone reading this have some ideas or experience? Id be really grateful.


Last edited by jones683; 07-19-2016 at 06:45 AM.
Reply With Quote
  #2  
Old 07-19-2016, 02:58 PM
mcginp mcginp is offline
Brainiac
 
Join Date: May 2014
Posts: 58
mcginp has 14 reputation pointsmcginp has 14 reputation points
Default

Are you out-pulsing your main number? If you aren't sending any digits I can see that being blocked.
Reply With Quote
  #3  
Old 07-19-2016, 11:08 PM
derekf derekf is offline
Whiz
 
Join Date: Nov 2015
Posts: 26
derekf has 14 reputation pointsderekf has 14 reputation points
Default

You shod also be able to use a sigma script in the sbc to accommodate this.
Reply With Quote
  #4  
Old 07-21-2016, 07:00 AM
jones683 jones683 is offline
Member
 
Join Date: Jul 2016
Posts: 3
jones683 has 10 reputation points
Default

Both good suggestions thanks for taking the time. Ill post back if and when this gets resolved
Reply With Quote
  #5  
Old 06-05-2017, 03:22 AM
zamant zamant is offline
Member
 
Join Date: Sep 2011
Posts: 3
zamant has 10 reputation points
Default Outbond dialing

Hi All,

I have a CM--> SM --> ASBC setup. whenever i dialed outbound via SIP trunk ASBC terminate the call.
Also message in incident is "Method Prohibited Out-of-Dialog"

Can someone help on this.
__________________
Tzaman
Reply With Quote
  #6  
Old 06-10-2017, 04:27 AM
johns1224 johns1224 is offline
Brainiac
 
Join Date: Apr 2017
Posts: 56
johns1224 has 9 reputation points
Default

Great suggestions. Will look further into it. Thank you.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:15 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.