Avaya Support Forums  

Go Back   Avaya Support Forums > IP Office Contact Center

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-11-2016, 02:26 AM
jtarjanyi jtarjanyi is offline
Brainiac
 
Join Date: May 2012
Posts: 95
jtarjanyi has 10 reputation points
Default Wallboard

Hello,

My customer would like more sophisticated data on wallboard. They have 2x 9 skill and we need topic statistics (Answared, Lost, and waiting calls).
I start build wallboard with Single level Monitor table with topic's statistic. It give the right data, but we need ONLY the total lines, because calls can be split into to main group, and both has 9 skill. From reporting prospective we need separated historical report for the 2x 9 skill, so calls are slpited 2x 9 topic.



Unfortunately to show 2x 9 topic on the wallboard is not a good idea, because of the too much data, so the customer just want to see summarized data for the 2 main group (P_Skills 1-9; U_Skills 1-9). I did not find any way to do that.

Alternatively: Is there any way to reach the raw data from wallboardbroker ? If yes we can create own wallboard solution, and create own calculation.
Reply With Quote
  #2  
Old 10-12-2016, 02:29 AM
smackintosh smackintosh is offline
Member
.
 
Join Date: Apr 2015
Posts: 6
smackintosh has 10 reputation points
Default

Unfortunately there is currently no way to show only the total row on the table.

There are web services exposed in the broker and Tomcat WSC but these are not supported for external use in current releases.

I tried to reduce the height of the table in manual layout and then scroll down so that only the total row was visible and this was retained when the table updated, but not after loading the board again, the scroll position reverted to the top. This may be a workaround if you are prepared to set the scroll position after load.

Regards,
Stuart
Attached Images
File Type: png HeightAndScroll.png (9.0 KB, 10 views)
Reply With Quote
  #3  
Old 10-12-2016, 02:51 AM
jtarjanyi jtarjanyi is offline
Brainiac
 
Join Date: May 2012
Posts: 95
jtarjanyi has 10 reputation points
Default

Quote:
Originally Posted by smackintosh View Post
Unfortunately there is currently no way to show only the total row on the table.

There are web services exposed in the broker and Tomcat WSC but these are not supported for external use in current releases.

I tried to reduce the height of the table in manual layout and then scroll down so that only the total row was visible and this was retained when the table updated, but not after loading the board again, the scroll position reverted to the top. This may be a workaround if you are prepared to set the scroll position after load.

Regards,
Stuart
Yes I have tried this workaround, unfortunately it not keep that state. It is changing during the day always, so it is very frustrating and useless
Reply With Quote
  #4  
Old 10-12-2016, 02:56 AM
smackintosh smackintosh is offline
Member
.
 
Join Date: Apr 2015
Posts: 6
smackintosh has 10 reputation points
Default

Understood. If you raise via the official support channels it may be something we can address in the future.
Regards,
Stuart
Reply With Quote
  #5  
Old 10-12-2016, 02:57 AM
jtarjanyi jtarjanyi is offline
Brainiac
 
Join Date: May 2012
Posts: 95
jtarjanyi has 10 reputation points
Default

Quote:
Originally Posted by smackintosh View Post
Understood. If you raise via the official support channels it may be something we can address in the future.
Regards,
Stuart
Thanks for suggestion, I will try it.

Regards
Janos
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:15 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.