Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-07-2014, 04:11 PM
abreu10 abreu10 is offline
Member
 
Join Date: Feb 2014
Posts: 3
abreu10 has 10 reputation points
Default VRRP - Avaya 5530

Hello guys

i have been trying config VRRP in my company, but happen some problems

the configuration is following

SW 1 (CLUSTER)

Interface Vlan 5 (inter 1,2,23,24) (10.10.5.2) IP VRRP(10.10.5.1)
interface vlan 1000 (inter 23,24 conectadas as portas 23,24 do SW 2) (IST) (10.1.2.1)
Interface Vlan 10 (inter 13,14,23,24) (10.10.10.2) IP VRRP(10.10.10.1)


SW 2 (CLUSTER)
Interface Vlan 5 (inter 1,2,23,24) (10.10.5.3) IP VRRP(10.10.5.1)
interface vlan 1000 (inter 23,24) (IST) (10.1.2.2)
Interface Vlan 10 (inter 13,14,23,24) (10.10.10.3) IP VRRP(10.10.10.1)


NOTEBOOK for network tests
ip address 10.10.5.10 - default gateway 10.10.5.1

SW 4 Edge(
vlan 10 (inter 1 a 3)
vlan ports 1,2 tagging tagAll filter-untagged-frame enable
mlt 1 name core_1
mlt 1 enable

SW 3(EDGE) com mlt habilitado
vlan 5 (portas 1 a 3)
vlan ports 1,2 tagging tagAll filter-untagged-frame enable
mlt 1 name core_1
mlt 1 enable


the problem is, VRRP works until 500 pings, after that, the Virtual IP stop to answer and i have to disconect one of cable of one switch of the cluster.

what i did wrong? or what i fogot to configure?

follow the show run

5530-1#SHOW ip vrrp int
VLAN VR Virtual Admin Primary Master
ID ID IP Address State State IP Address IP Address
---- --- --------------- ---------- ----- --------------- ---------------
5 5 10.10.5.1 Master Up 10.10.5.2 10.10.5.2
10 10 10.10.10.1 Master Up 10.10.10.2 10.10.10.2


5530-1(config)#SHOW RUN
! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 5530-24TFD
! Software version = v6.3.3.008
!
! Displaying only parameters different to default
!================================================
enable
configure terminal
!
! *** CORE ***
!

tftp-server 10.1.1.10
!
! *** SNMP ***
!
snmp-server name "5530-1"
!
! *** IP ***
!
ip address switch 10.10.5.2
ip address netmask 255.255.255.0
ip address source configured-address
!
! *** IP Manager ***
!
!
! *** ASSET ID ***
!
!
! *** EAP ***
!
!
! *** IPFIX ***
!
!
! *** System Logging ***
!
!
! *** STACK ***
!
!
! *** Default Command Interface ***
!
!
! *** Custom Banner ***
!
!
! *** STP (Phase 1) ***
!
spanning-tree port-mode auto
!
! *** VLAN ***
!
vlan create 5,10,1000 type port 1
vlan name 5 "data1"
vlan name 10 "data2"
vlan name 1000 "IST"
vlan ports 1-2,13-14,23-24 tagging tagAll filter-untagged-frame enable
vlan configcontrol flexible
vlan members 1 NONE
vlan members 5 1-3,23-24
vlan members 10 13-20,23-24
vlan members 1000 23-24
vlan ports 3,6-12 pvid 5
vlan ports 15-20 pvid 10
vlan ports 21-22 pvid 5
vlan configcontrol strict
!
! *** IGMP ***
!
!
! *** EAP Guest VLAN ***
!
!
! *** EAP Fail Open VLAN ***
!
!
! *** EAP Voip VLAN ***
!
!
! *** Port Mirroring ***
!
!
! *** QOS ***
!
!
! *** RMON ***
!
!
! *** Interface ***
!
!
! *** MLT (Phase 1) ***
!
mlt 1 name "ist" enable member 23-24
!
! *** MAC-Based Security ***
!
!
! *** LACP ***
!
!
! *** ADAC ***
!
!
! *** STP (Phase 2) ***
!
spanning-tree port-mode normal
interface FastEthernet ALL
spanning-tree port 1-3,13-20,23-24 learning disable
exit
!
! *** VLAN Phase 2***
!
vlan mgmt 5
!
! *** MLT (Phase 2) ***
!
mlt spanning-tree 1 stp 1 learning disable
!
! *** PoE ***
!
!
! *** RTC ***
!
! clock set 01:31:06 07 January 2101
!
! *** Avaya Energy Saver ***
!
!
! *** AUR ***
!
!
! *** AAUR ***
!
!
! *** L3 ***
!
ip routing
interface vlan 10
ip address 10.10.10.2 255.255.255.0 2
exit
interface vlan 1000
ip address 10.1.2.1 255.255.255.252 3
exit

! --- ECMP ---


!
! *** IPV6 ***
!
!
! *** VLACP ***
!
!
! *** Brouter Port ***
!
!
! *** DHCP Relay ***
!
!
! *** 802.1ab ***
!

!
! *** 802.1AB MED Voice Network Policies ***
!
!
! *** L3 Protocols ***
!

! --- Proxy ARP ---


! --- UDP Broadcast Forwarding ---


! --- VRRP ---

router vrrp enable
interface vlan 5
ip vrrp address 5 10.10.5.1
ip vrrp 5 enable
ip vrrp 5 priority 110
ip vrrp 5 backup-master enable
exit
interface vlan 10
ip vrrp address 10 10.10.10.1
ip vrrp 10 enable
ip vrrp 10 priority 110
ip vrrp 10 backup-master enable
exit

! --- Route Policies ---


! --- OSPF ---


! --- RIP ---

!
! *** DHCP SNOOPING ***
!
!
! *** ARP INSPECTION ***
!
!
! *** IP SOURCE GUARD ***
!
!
! *** STACK MONITOR ***
!
!
! *** SMLT ***
!
interface mlt 1
ist peer-ip 10.1.2.1
ist vlan 1000
ist enable
exit
!
! *** SLPP ***
!
!
! *** PIM ***
!
!
! *** UNICAST STORM CONTROL ***


SW 2

5530-2(config)#show ip vrrp inter
VLAN VR Virtual Admin Primary Master
ID ID IP Address State State IP Address IP Address
---- --- --------------- ---------- ----- --------------- ---------------
5 5 10.10.5.1 Backup Up 10.10.5.3 10.10.5.2
10 10 10.10.10.1 Backup Up 10.10.10.3 10.10.10.2




show run
! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 5530-24TFD
! Software version = v6.3.3
!
! Displaying only parameters different to default
!================================================
enable
configure terminal
!
! *** CORE ***
!

tftp-server 10.1.1.10
!
! *** SNMP ***
!
snmp-server name "5530-2"
!
! *** IP ***
!
ip address switch 10.10.5.3
ip address netmask 255.255.255.0
ip address source configured-address
!
! *** IP Manager ***
!
!
! *** ASSET ID ***
!
!
! *** EAP ***
!
!
! *** IPFIX ***
!
!
! *** System Logging ***
!
!
! *** STACK ***
!
!
! *** Default Command Interface ***
!
!
! *** Custom Banner ***
!
!
! *** STP (Phase 1) ***
!
spanning-tree port-mode auto
!
! *** VLAN ***
!
vlan create 5,10,1000 type port 1
vlan name 5 "data1"
vlan name 10 "data2"
vlan name 1000 "IST"
vlan ports 1-2,13-14,23-24 tagging tagAll filter-untagged-frame enable
vlan configcontrol flexible
vlan members 1 NONE
vlan members 5 1-3,23-24
vlan members 10 13-20,23-24
vlan members 1000 23-24
vlan ports 3,6-12 pvid 5
vlan ports 15-20 pvid 10
vlan ports 21-22,25-26 pvid 5
vlan configcontrol strict
!
! *** IGMP ***
!
!
! *** EAP Guest VLAN ***
!
!
! *** EAP Fail Open VLAN ***
!
!
! *** EAP Voip VLAN ***
!
!
! *** Port Mirroring ***
!
!
! *** QOS ***
!
!
! *** RMON ***
!
!
! *** Interface ***
!
!
! *** MLT (Phase 1) ***
!
mlt 1 name "ist" enable member 23-24
!
! *** MAC-Based Security ***
!
!
! *** LACP ***
!
!
! *** ADAC ***
!
!
! *** STP (Phase 2) ***
!
spanning-tree port-mode normal
interface FastEthernet ALL
spanning-tree port 1-3,13-20,23-24 learning disable
exit
!
! *** VLAN Phase 2***
!
vlan mgmt 5
!
! *** MLT (Phase 2) ***
!
mlt spanning-tree 1 stp 1 learning disable
!
! *** PoE ***
!
!
! *** RTC ***
!
! clock set 00:23:49 07 January 2005
!
! *** Avaya Energy Saver ***
!
!
! *** AUR ***
!
!
! *** AAUR ***
!
!
! *** L3 ***
!
ip routing
interface vlan 10
ip address 10.10.10.3 255.255.255.0 2
exit
interface vlan 1000
ip address 10.1.2.2 255.255.255.252 3
exit

! --- ECMP ---


!
! *** IPV6 ***
!
!
! *** VLACP ***
!
!
! *** Brouter Port ***
!
!
! *** DHCP Relay ***
!
!
! *** 802.1ab ***
!

!
! *** 802.1AB MED Voice Network Policies ***
!
!
! *** L3 Protocols ***
!

! --- Proxy ARP ---


! --- UDP Broadcast Forwarding ---


! --- VRRP ---

router vrrp enable
interface vlan 5
ip vrrp address 5 10.10.5.1
ip vrrp 5 enable
ip vrrp 5 backup-master enable
exit
interface vlan 10
ip vrrp address 10 10.10.10.1
ip vrrp 10 enable
ip vrrp 10 priority 90
ip vrrp 10 backup-master enable
exit

! --- Route Policies ---


! --- OSPF ---


! --- RIP ---

!
! *** DHCP SNOOPING ***
!
!
! *** ARP INSPECTION ***
!
!
! *** IP SOURCE GUARD ***
!
!
! *** STACK MONITOR ***
!
!
! *** SMLT ***
!
interface mlt 1
ist peer-ip 10.1.2.2
ist vlan 1000
ist enable
exit
!
! *** SLPP ***
!
!
! *** PIM ***
!
!
! *** UNICAST STORM CONTROL ***
!
5530-2#
Reply With Quote
  #2  
Old 02-07-2014, 04:12 PM
abreu10 abreu10 is offline
Member
 
Join Date: Feb 2014
Posts: 3
abreu10 has 10 reputation points
Default continuing

SW 3 edge

5530-24TFD#show run
! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 5530-24TFD
! Software version = v6.3.3
!
! Displaying only parameters different to default
!================================================
enable
configure terminal
!
! *** CORE ***
!

!
! *** SNMP ***
!
!
! *** IP ***
!
ip address netmask 255.255.255.0
ip address source configured-address
!
! *** IP Manager ***
!
!
! *** ASSET ID ***
!
!
! *** EAP ***
!
!
! *** IPFIX ***
!
!
! *** System Logging ***
!
!
! *** STACK ***
!
!
! *** Default Command Interface ***
!
!
! *** Custom Banner ***
!
!
! *** STP (Phase 1) ***
!
spanning-tree port-mode auto
!
! *** VLAN ***
!
vlan create 5,999 type port 1
vlan name 5 "data1"
vlan name 999 "mgtm"
vlan ports 1-2,13-14 tagging tagAll filter-untagged-frame enable
vlan configcontrol flexible
vlan members 1 NONE
vlan members 5 1-3
vlan ports 3 pvid 5
vlan configcontrol strict
!
! *** IGMP ***
!
!
! *** EAP Guest VLAN ***
!
!
! *** EAP Fail Open VLAN ***
!
!
! *** EAP Voip VLAN ***
!
!
! *** Port Mirroring ***
!
!
! *** QOS ***
!
!
! *** RMON ***
!
!
! *** Interface ***
!
!
! *** MLT (Phase 1) ***
!
mlt 1 name "core_1" enable member 1-2
!
! *** MAC-Based Security ***
!
!
! *** LACP ***
!
!
! *** ADAC ***
!
!
! *** STP (Phase 2) ***
!
spanning-tree port-mode normal
interface FastEthernet ALL
spanning-tree port 1-3 learning disable
exit
!
! *** VLAN Phase 2***
!
vlan mgmt 5
!
! *** MLT (Phase 2) ***
!
mlt spanning-tree 1 stp 1 learning disable
!
! *** PoE ***
!
!
! *** RTC ***
!
! clock set 00:30:42 07 January 2005
!
! *** Avaya Energy Saver ***
!
!
! *** AUR ***
!
!
! *** AAUR ***
!
!
! *** L3 ***
!

! --- ECMP ---


! No license for ECMP.
! Contact support@nortel.com to update Software license.
!
! *** IPV6 ***
!
!
! *** VLACP ***
!
!
! *** Brouter Port ***
!
!
! *** DHCP Relay ***
!
!
! *** 802.1ab ***
!

!
! *** 802.1AB MED Voice Network Policies ***
!
!
! *** L3 Protocols ***
!

! --- Proxy ARP ---


! --- UDP Broadcast Forwarding ---


! --- VRRP ---


! --- Route Policies ---


! --- OSPF ---


! --- RIP ---

!
! *** DHCP SNOOPING ***
!
!
! *** ARP INSPECTION ***
!
!
! *** IP SOURCE GUARD ***
!
!
! *** STACK MONITOR ***
!
!
! *** SMLT ***
!
!
! *** SLPP ***
!
!
! *** PIM ***
!
!


THANK YOUU
Reply With Quote
  #3  
Old 09-14-2014, 02:25 PM
krausm krausm is offline
Member
 
Join Date: Mar 2012
Posts: 3
krausm has 11 reputation points
Default

Hi,
your IST misconfigured.
The ist peer addr must be the ip of the ist-vlan of the other switch NOT the own.

with
show mlt

and
show smlt

you can see if the IST is working or not
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:46 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.