Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-28-2010, 11:06 AM
rogerg's Avatar
rogerg rogerg is offline
Brainiac
 
Join Date: Jan 2010
Location: Houston, Tx
Posts: 51
rogerg has 10 reputation points
Default Auth Codes

Sorry for the dumb question, however thought I would just check...

Other than ProVision (which we don't have), is there an easy way to remove all AuthCodes from CM? We have over 13,000 and I need to delete them all.
__________________
Gary Rogerson
AVAYA ACE
Reply With Quote
  #2  
Old 09-30-2010, 02:31 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Solution Delivered Auth Codes cleanup

Hi,

Unfortunately, there isn't a command that clears all the auth codes at once. you will need to do it one by one if you're using the SAT interface directory. This is done using the "change authorization-code xxxx" command and then remove one by one.

However, there is a way to do it using ASA (Avaya Site Administrator) if you have one. here are the steps. Method 1 and 2 are somewhat similar.

Method 1:
***********
- start ASA (I used version 6.0)
- On the left side tab bar, click on "Advanced"
- Then click on "Find and replace" option which will open a new dialog box
- in the dialog box, there is a drop down list, choose: "authorization-code"
- then in the readio-buttons below that drop down list, click on "Remove"
- click the next button
- now, in the list control, in the field column, click and drom the drop down list, choose "Auth code"
- in the value column, type "1*" (this means any authcode stating with 1 and the rest is wild card"
- then click the next button
- just click the next button (leaving the default value "Run now" checked

This will connect and clear all the auth codes that start with 1. repeat the same for the rest of the digits (i.e., 2*, 3,*, 4*, 5*, etc..)

Method 2:
***********
- start ASA (I used version 6.0)
- On the left side tab bar, click on "Advanced"
- Then click on "Find and replace" option which will open a new dialog box
- in the dialog box, there is a drop down list, choose: "authorization-code"
- then in the readio-buttons below that drop down list, click on "Remove"
- click the next button
- now, in the list control, in the field column, click and drom the drop down list, choose "COR"
- in the value column, type a COR number that exists
- then click the next button
- just click the next button (leaving the default value "Run now" checked

This will connect and clear all the auth codes that are assigned to that COR. of course, you will need to repeat this for all the CORs.

Choose the method that best suites to the way the auth-codes are administered.

Hope this helps.
Drop a message here with your feedback.

Arbi
Reply With Quote
  #3  
Old 09-30-2010, 02:38 PM
rogerg's Avatar
rogerg rogerg is offline
Brainiac
 
Join Date: Jan 2010
Location: Houston, Tx
Posts: 51
rogerg has 10 reputation points
Default

Wow! Actually that does help allot! Thanks! All our codes are on one COR, so I will use that.
__________________
Gary Rogerson
AVAYA ACE
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:48 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.