Wlan 8100 - ap 8120

[jiles]

Can anyone provide an example of the DHCP settings (Option 43 ) required to install this AP. ( Win2003 server)
IP address of wireless controller = 192.168.1.1 / 24
I can provide the AP with an ip address and this can be ping'd form the controller.
However the AP does no appear as "discovered"

[ssabnis]

Please refer http://support.avaya.com/css/P8/documents/100110217 page 15 for DHCP settings (Option 43 ) configuration for WLAN8100.

[ashleywroe]

This is what Option 43 on a windows DHCP server looks like using 192.168.1.1 and 192.168.1.2 as controller addresses.

Opt43.JPG

[jwelsh5454]

Originally Posted by jiles

Can anyone provide an example of the DHCP settings (Option 43 ) required to install this AP. ( Win2003 server)
IP address of wireless controller = 192.168.1.1 / 24
I can provide the AP with an ip address and this can be ping'd form the controller.
However the AP does no appear as "discovered"

For other DHCP servers, i.e. Infoblox appliance, option 43 is entered as:

• ip:your-wireless-controller ip address
• example ip:192.168.1.1

I have never entered the subnet mask

[jkgreene]

When I go to the license generation url and try to create a new License bank account for my new WLAN 8180 controller and enter my license code, I get an error saying "attempted to exceed the maximum number of installs allowed" . So i can't create an account and cannot generate a license for my new unit.

Anyone ever see this before.?

Thanks
Joe'l

[mratner89]

Originally Posted by jiles

Can anyone provide an example of the DHCP settings (Option 43 ) required to install this AP. ( Win2003 server)
IP address of wireless controller = 192.168.1.1 / 24
I can provide the AP with an ip address and this can be ping'd form the controller.
However the AP does no appear as "discovered"

Same thing.

Option 43 configured correctly. I wiresharked dhcp - APs get ip and i can connect with telnet to AP.

Controller in mobility domain, managed and wireless ip confired correct and enabled..
I havent any idea
License for 64 APs installed..
I can ping APs from controller.. but they dont apear in discovered.

[vtelloaragon]

Hi
I have the same problem.... AP is not discovered.....could you tell me what you did to solve this?

[dhassa]

Hello friends,

Me too,I have the same problem, i couldn't discovered my AP, i'm using WC8180 and my AP is AP8120 ,and my dhcp is on my router cisco 875w.

could you please help me

thank you in advance

[horne17]

Has anyone resolved this??? Happened to us on Tuesday when someone upgraded the firewall / outside router

thanks

mike.horner@esquimalt.ca

[bhiggy]

Make sure that you have a local DNS entry for WC1 pointing to your controller.