Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-07-2014, 01:36 AM
smaiyaur smaiyaur is offline
Guru
.
 
Join Date: Nov 2013
Posts: 107
smaiyaur has 19 reputation pointssmaiyaur has 19 reputation points
Default CS1K DECT issues.

latest DECT issues list, issues with Design.



Issues and questions:

CS1k CPE - After installing DMC dectmanager on a windows 7 client, the dect manager cold not synchronize with the DMC card in the CS1000E.

· Base stations in DMC DECT Manager have duplicated RPN numbers
A customer has a DMC DECT system (MGXPEC based) with more than 16 cards (2 shelves configuration). Some base stations shown in the list in DMC DECT manager have the same rpn. May be a DMC DECT Manager bug (Avaya side).

· SR# , PDGR site – DAP doesn’t recover after reboots.
The damage DAP is rebooting once, then it is good for 2-3 day. Then the same one is rebooting again and good for 1-2 days.
The DAP will reboot more and more in ever shorter intervals until the DAP is only reboots and never runs stable.
Awaiting feedback from R&D


· SR# CS1000 rls 7.5 Sip Dect Campon problem
CS1K PEP in progress -The patch will provide configurable delay in Customer data block (0 / 2 / 4 or 8 sec for all SIP Line clients).

Last edited by smaiyaur; 04-08-2014 at 07:18 AM.
Reply With Quote
  #2  
Old 04-17-2014, 01:48 AM
darrenbk darrenbk is offline
Aspiring Member
.
 
Join Date: Nov 2013
Posts: 1
darrenbk has 10 reputation points
Default Camp-on working with SIPDECT

The following is documented in further detail in SOLN248695

CS1000 Call Server patch MPLR33047 has been created to allow the camp-on feature to work with Avaya CS1000 SIPDECT
NOTE: That this is CS1000 workaround for a SIP DECT limitation:
When the other party releases the call the SIP DECT client is BUSY for several seconds providing the corresponding signal to the user.

A new "DCAM" prompt is added to Data Block: TIM (Timers) in Overlay 15.

DCAM (0)-7 SIP DECT Camp-On Delay Timer:

The number of seconds in 2 second intervals that the Camp-On to SIP DECT is delayed before being presented. If entry is 0, the timer is not active.
This prompt is not available in EM.
"SIP Line Services" package 417 must be equipped.



In a SIPDECT implementation the recommended DCAM value = 4 (~8 seconds) to avoid the problems from being encountered. I lower value may result in the camped on call being presented too quickly.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:59 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.