POM blocks all MPP sessions

[stankn]

Hi guys,

I have really big problem installing POM in CC Elite environment. Here is the configuration:

• EPM, AEPM, MPP - v7.0.2 OVA depolyed
• POM installation for each EPM - v3.0.2
• application server(tomcat) is on EPM
• DB server is internal PostgreSQL on EPM
• I have no license, but system is in 30 days grace period
• environment is SIP, using Session Manager

After installation and configuration of POM, when I start Agent Manager service, this is what I can see in logs respectively:


"Waiting for router of zone Default to get initialized" - multiple times
"Unable to create session, max threshold of 30 reached"
"Find_MPP_with_Resource returned an error. No resources available"
"Failed to launch OCWS. OCWS Fault: AppIntfServiceSOAPImpl::launchCCXML(), Find_MPP_with_Resource() No resources available"


So, what I've found on MPP is that those 30 sessions are used by 0:PomDriverApp and 0:Nailer application. This happens in about 20 seconds after starting of Agent Manager service, and after that the whole system goes down. At this point, all I can do is to restart MPP.



I have to mention that I've tested EP inbound and OCWS and it works until I start Agent Manager. Also, I've tested some basic POM campaign in that 20 seconds before everyting go down, and it works.
I payed attention on Nailer (http://172.31.10.67:7080/Nailer/ccxml/start.jsp) and
PomDriverApp (http://172.31.10.67:7080/PomDriverApp/ccxml/start.jsp) names. I've exchanged certificates, step by step using documentation. Everything is in Default Zone, I didn't touch it at all. As you could see, password for OCWS is ok because it works.



If someone has any idea, I will really appreciate it to share it with me.


Thanks,
Nikola

[sandeepreddy]

Hi Nikola,

Please make sure the Nailer and driver apps are configured to use https and re-exchnage the certificates once done. Should address the router not getting initialized issue.

[stankn]

Originally Posted by sandeepreddy

Hi Nikola,

Please make sure the Nailer and driver apps are configured to use https and re-exchnage the certificates once done. Should address the router not getting initialized issue.

yeah, applications should use https...

Thank you very much!

Nikola

[eromagnoli]

Can you pleasse tell me if you found the solution to this problema ??
If so, can you please share it ?

thanks,
Eugenio

[stankn]

Originally Posted by eromagnoli

Can you pleasse tell me if you found the solution to this problema ??
If so, can you please share it ?

thanks,
Eugenio

httpS://172.31.10.67:7080/Nailer/ccxml/start.jsp