Avaya Support Forums  

Go Back   Avaya Support Forums > IP Office Contact Center

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-21-2020, 09:30 AM
navar126 navar126 is offline
Hot Shot
 
Join Date: Sep 2019
Posts: 21
navar126 has 10 reputation points
Exclamation Avaya IP Office - Enable International dialing for a few extensions/users

Hi,

I am not a phone guy by any means. We moved from Cisco to Avaya during the summer of 2019. We hired a team to make the move for us and since then we have been dealing with little issues here and there for months; to the point that now when I ask them a question they would start to charge us.

To the point. In our environment we need, out of hundreds of extensions divided by campuses each with its own user rights and shortcodes depending on where the extension is, only 3 phones that can dial internationally by dialing. We dial 8 to dial out and then I want them to dial 011 to enter the number

Lets say this campus that i need has multiple user rights, MATH LD 179, MATH Local 179, MATH LD 139, MATH Local 139 (seems like I am missing MATH INTL 179). Each extension, or user, falls into its corresponding container.

Inside ARS in the 500 V2 we have multiple entries. For this campus There is one called MATH with its ID being 75. This MATH entry has the following table:

Code | Telephone Number | Feature | Line Group ID

0N | NSi"Mainnumber" | Barred | 5

1817N | 1817NSi"Mainnumber" | Dial | 5

911 | 911Si"Mainnumber" | Dial Emergency | 5

XXXXXXX | NSi"Mainnumber"   | Dial | 5

XXXXXXXXXX | nsI NSi"Mainnumber" | Dial | 5

1800N | 1800N | Dial | 5

188N | 1888N | Dial | 5

1877N | 1877N | Dial | 5

Inside the Short Code tab, for MATH, I see that there are matching codes for the ID for this campus such as **751817XXXXXXX | 1817N | dial , **75911 | 911 | dial...etc

I am thinking I need to :
  1. Create an ARS group called MATH INTL with whatever ID it gives me, let's say it gives me 80, copy all the codes from the group ID 75 into group ID 80
  2. Then add 011N | NSi"Mainumber" | Dial | dial line group 5. Then, in the Short Code tab, create the short code **75011N# | 011N | Dial | 75 (being its group ID). (I am adding the # so its adds an extra step to dial internationally. Correct me if I am wrong)
  3. Then create a User Right group called MATH INTL 179 with the codes from the other one but adding 011N | **75011N# | Dial | Whatever line group the other one has.

Please Correct me If I am wrong. Again I am by no means a phone guy, just happened to take over the job and have a programmer that isn't willing to help me without charging (even though this was in his scope) and learning as I go.
Reply With Quote
 

Tags
avaya ipo 500, international calls, ipo 500v2, short code

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:00 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.