Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Thread Tools Search this Thread Display Modes
Old 05-09-2013, 10:28 AM
maxvasquezcacho maxvasquezcacho is offline
Join Date: Jul 2012
Posts: 33
maxvasquezcacho has 11 reputation points
Default Communication manager messaging problems

Hi guys:

I have some problems with CMM messaging. I have a CM in a S8300D. I configured and everything went well, but when I call to the 5100 (hunt grouo number for the CMM) I can hear the classic voice welcome Audix blah blah, but then at the range from 10 seconds to 40 the call drops. Then I tried to call again and I get busy tone. I need to wait a couple of seconds more and try again and I can hear the greeting again, but the call again drops in the 10th second.

I installed the SP 2 for the CMM, but the problem didn't solve.

Please help me.

I apologize for my english, I'm not a native speaker.

Reply With Quote
Old 05-09-2013, 03:11 PM
maxvasquezcacho maxvasquezcacho is offline
Join Date: Jul 2012
Posts: 33
maxvasquezcacho has 11 reputation points

Also, I'm not sure if I need H.323 license in order to get this work.

Thanks in advance
Reply With Quote
Old 05-12-2013, 05:25 PM
rvengco rvengco is offline
Join Date: Jul 2010
Posts: 35
rvengco has 10 reputation points

Hi maxvasquezcacho,

Are you on CMM version 5.2.1 or CMM6.X? You need H.323 license in order for you to connect/configure the CM and CMM via H.323 trunk (eg.Maximum Administered H.323 Trunks)
You can verify the configurtation and requirements on the below implementation document for CMM

I believe you have enough H.323 license since you mentioned that you were able to call Audix/CMM in the first place and you hear the greetings only that it drops after 10 to 40 seconds.

Please make sure that the "Calls Share IP Signaling Connection" parameter in your signalling group used for the CMM is set to y.

Also make sure that your trunk members are on "in-service/idle" then make a list trace on the tac used for the CMM trunk. What do you see on the trace when you make the call? Do you see a denial event (e.g denial event 1220 Recovery on timer expiry?)?

Also double check your mediagateway, for example you are using G450, login to the G450 and do command "show faults" and "show voip-dsp" and verify if you see some errors. if none, please make sure that your mediagateway firmware is upgraded to the latest version depending on you CM version. You can check in the support site which is the latest medigateway firmware if it's compatible with your CM version.

Hope this helps
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 07:45 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.