![]() ![]() |
#1
|
|||
|
|||
![]()
Hi All,
Need some advice on below issue. MES 6.2 , 96xx SIP phone registered to SM. I can make calls from SIP phones to H.323 phones and vice-versa. The only issue i have is to dial operator console 9 from SIP phone. I get error 4xx route not found. I have entry for 9 in dial pattern like for other H.323 phones. Is there any setting in 46xxsetting file? Or any other suggestions i can check. Thanks / Gagan |
#2
|
|||
|
|||
![]()
hi, the 4xx route not found is send by the SM, besause doesn't have a route policy, you have to create that.
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|