Avaya Support Forums  

Go Back   Avaya Support Forums > Small and Medium Business Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-02-2014, 07:40 PM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default One-X unavailable

I have a user that is having difficulty logging into a One-X instance. The user is able to log in, then once the page is populated with the normal content, they're immediately logged out with the message "You have been logged out because the phone system became unavailable."

The system comprises of two sites, IPO500v1 (R7/v9) at each site connected through SCN over IPsec VPN. Connectivity/status isn't an issue according to One-X (green across the board). The system when queried via the admin console for the user in question responds with Valid. Restarting the One-X service has had no change in resulting outcome for this user in particular.

I've disabled the user, set the rights from Office Worker back to basic user, then reset the properties back to normal and also verified that there are licenses available for each system in the System Status app (Resources->Licenses), specifically the system that the user belongs to.

At a loss as what to look at next and would appreciate any advice. Thanks in advance.

Last edited by drobbo; 02-02-2014 at 07:59 PM.
Reply With Quote
  #2  
Old 02-03-2014, 06:12 AM
laburu laburu is offline
Whiz
.
 
Join Date: Sep 2010
Posts: 29
laburu has 12 reputation points
Default

In your post you mention that there is one system running R7 and the other R9, it would be interesting to know the version of the One-X portal as well.

You should always try to keep them in the same level.

Are the affected users part of a specific one, or does it happen to uses in both? Have you tried a different PC and/or browser?

You might want to delete the affected user merge and, create it again, then resynch users in the 1XP Admin.
Reply With Quote
  #3  
Old 02-03-2014, 05:08 PM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default

Both systems are release 7, version 9. One-X Portal is version 9 as well.

This is only affecting one specific user on one system. All other users are able to log in normally. Different browsers and computers have been tried with the same result.

The differences in the users are that the users that can log in aren't using the telecommuter option (they have physical phones and they're already logged in). The remote worker IS using the telecommuter option and specifying their telecommuter number.

Observing the system with the user through Monitor isn't showing anything out of the ordinary.

So you're suggesting deleting the affected user from the IPO, creating it again and then forcing a resync in the One-X admin, correct? Thinking about it, I recall running into this issue last year and that may have been the fix but I'm not 100% certain.
Reply With Quote
  #4  
Old 02-07-2014, 12:12 AM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default

Jumped on the system last night and:

* Deleted the user
* Waited ten minutes for OXP to resync (should do it after five but I was generous)
* Added the user back
* Waited ten minutes for OXP to resync
* Attempted login, was successful and then kicked back out after the dashboard had finished loading (original issue) advising that the system had become unavailable.
Reply With Quote
  #5  
Old 02-11-2014, 06:46 AM
fischh fischh is offline
Aspiring Member
 
Join Date: Jun 2012
Posts: 1
fischh has 10 reputation points
Default Same Issue

I have the very same issue, it is only affecting a user logging on as Telecommuter.

System is 8.1 (69)
OneX is :Version: 8.1.93


any help would be greatly appreciated.
Reply With Quote
  #6  
Old 02-12-2014, 06:05 AM
laburu laburu is offline
Whiz
.
 
Join Date: Sep 2010
Posts: 29
laburu has 12 reputation points
Default

Try uninstallng and installing the java version on the client pc.
Reply With Quote
  #7  
Old 02-13-2014, 01:11 AM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default

In my case, that may work. I'll give it a crack tomorrow. I have to manually configure a 9608 for the troubled remote user anyway and that alone may fix the issue.
Reply With Quote
  #8  
Old 02-14-2014, 03:36 PM
rbrookes's Avatar
rbrookes rbrookes is offline
Guru
.
 
Join Date: Jan 2012
Location: rbrookes@avaya.com
Posts: 141
rbrookes has 10 reputation points
Default

Hey drobbo - did that work?
__________________
Russ Brookes | Avaya, KCS Leader | +1 613.771.7590 | rbrookes@avaya.com | NA Eastern Time Zone
Reply With Quote
  #9  
Old 02-16-2014, 08:11 PM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default

Nah mate, didn't get to it as other operational things came up. Will try and get to it today and see how things go. Will update the post once that happens.
Reply With Quote
  #10  
Old 03-11-2014, 08:36 PM
drobbo drobbo is offline
Member
 
Join Date: Feb 2014
Posts: 8
drobbo has 10 reputation points
Default

Once I swapped the users existing router (D-Link DIR-130) for a DrayTek 2830 (there was an issue with the D-Link munging packets to the IPO from the new handset) and staged up a 9608 handset, everything came good and the user was then able to log into One-X. The options chosen had changed however as they were now logging their phone in as well and weren't using the Telecommuter option.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:51 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.