![]() ![]() |
#1
|
|||
|
|||
![]()
Hello!
I set up a tunnel between IP Phone 9620 and Cisco ASA. Tunnel works, but when the phone 9620 connects to the IPO via VPN, IPO monitor displays the message: H323Evt: Recv GRQ from 0a1505e6 H323Evt: e_H225_AliasAddress_dialedDigits alias H323Evt: found number <210> H323Evt: Recv: RegistrationRequest 10.21.5.230; Endpoints registered: 0; Endpoints in registration: 0 H323Evt: e_H225_AliasAddress_dialedDigits alias H323Evt: found number <210> H323Evt: RRQ --- CallSigProtocol is H323AnnexL_P. Go for Avaya VPN phone H323Evt: RRQ --- Extn(210) VPN phones not allowed On the telephone display "Wrong Set Type" and the phone is not connected to the IPO. The parameter "VPN phone allowed" does not exist in tab: Extension > VoiP Last edited by ocean; 03-16-2016 at 05:52 AM. |
#2
|
|||
|
|||
![]()
How is the phone configured to connect to the IP Office? Is it using the ASA as a VPN gateway or are you trying to VPN into the IP Office directly?
|
#3
|
|||
|
|||
![]()
Hello!
ASA as a VPN gateway. The 9620 (and 9640) connects to Cisco ASA (connected successfully), and then to IPO 9.1 (SP6). Last edited by ocean; 03-18-2016 at 12:44 AM. |
#4
|
|||
|
|||
![]()
The same problem is described here: http://www.tek-tips.com/viewthread.cfm?qid=1723713
As a result, they did downgrade to IPO 8... |
![]() |
Tags |
ip office 9.1, vpn phone |
Thread Tools | Search this Thread |
Display Modes | |
|
|