Avaya Support Forums  

Go Back   Avaya Support Forums > Small and Medium Business Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 09-08-2010, 04:37 AM
ista6's Avatar
ista6 ista6 is offline
Whiz
 
Join Date: Feb 2010
Location: Netherlands
Posts: 35
ista6 has 10 reputation points
Default

I have used the corresponding ip address in the vpn policy.
__________________
Honey, i fried the IP Office!!!!
Reply With Quote
  #12  
Old 09-08-2010, 06:09 AM
mongo5150's Avatar
mongo5150 mongo5150 is offline
Hot Shot
 
Join Date: Sep 2010
Posts: 10
mongo5150 has 10 reputation points
Default

Peter, pm me. I have a non post related question.
Reply With Quote
  #13  
Old 09-08-2010, 09:21 AM
wkirk's Avatar
wkirk wkirk is offline
Brainiac
.
 
Join Date: May 2010
Location: Highlands Ranch
Posts: 61
wkirk has 10 reputation points
Default

Thanks for the information, I just got an e-notification about a new 46xxsettings.txt file. Not sure if this will help or not. So FYI only.

https://support.avaya.com/css/appman...Downloads_Page

The 46xxsettings.txt file is used to specify certain system parameters. It is used by all 1600, 16CC, 3600, 4600 and 9600 IP & SIP Telephones. The latest version of the 46xxsettings.txt file has been updated to include new parameters used by the 1600, 16CC, 3600, 4600 and 9600 IP & SIP Telephones.
IMPORTANT: There are TWO 46xxsettings.txt files for these products. Make sure you download and use the correct file for your product and release.
Reply With Quote
  #14  
Old 10-08-2010, 12:21 PM
joserod joserod is offline
Aspiring Member
 
Join Date: Oct 2010
Posts: 1
joserod has 10 reputation points
Default

Hello guys I’ve try to change my 9630G phone I done all of the above yet my does not give a option for VPN any suggestion would be appreciated
thanks
Reply With Quote
  #15  
Old 10-09-2010, 04:56 AM
ista6's Avatar
ista6 ista6 is offline
Whiz
 
Join Date: Feb 2010
Location: Netherlands
Posts: 35
ista6 has 10 reputation points
Default

Put this in your 46xxsettings.txt file.


IF $GROUP SEQ 0 GOTO NO96XXVPN

IF $GROUP SEQ 876 GOTO 96XXVPN

# 96XXVPN

################################################## #
## VPN Mode
## 0: Disabled, 1: Enabled.
################################################## #

SET NVVPNMODE 1

################################################## #
## Craft access
## 0: Enabled, 1: only view option is available?
################################################## #

SET PROCSTAT 0

################################################## #
## craft access code
################################################## #

SET PROCPSWD 27238

################################################## #
## VPN craft access
## 0: disabled, 1: view only
## 2: View and edit.
################################################## #

SET VPNPROC 2

# NO96XXVPN


Then enter the craft menu and set the group to 876 instead of 0
Tehn reboot the phone and it will pull the 46xxsettings again but now it allows you to enable the VPN option.
__________________
Honey, i fried the IP Office!!!!
Reply With Quote
  #16  
Old 02-03-2011, 07:09 PM
gecko1 gecko1 is offline
Aspiring Member
 
Join Date: Feb 2011
Posts: 1
gecko1 has 10 reputation points
Default Nothing seems to work?

I've done everything suggested here...I actually see the file being downloaded into the 9620 phone but the phone ALWAYS comes up with VPN disabled & it won't let me change it?

Any ideas what I am doing wrong?
Reply With Quote
  #17  
Old 02-17-2011, 06:12 AM
ista6's Avatar
ista6 ista6 is offline
Whiz
 
Join Date: Feb 2010
Location: Netherlands
Posts: 35
ista6 has 10 reputation points
Default

Hi,

Did you changed the group on the phone?
Press the mute button and type craft (27238) and then go to group.
Enter group number 876 (vpn) and save and exit
The phone reboots ans then will get the right information.
__________________
Honey, i fried the IP Office!!!!
Reply With Quote
  #18  
Old 04-05-2013, 11:38 AM
macosx2new macosx2new is offline
Member
 
Join Date: May 2012
Posts: 8
macosx2new has 10 reputation points
Question NVVPNUSER in 46xxsetting file

Hi Folks, Hope all is well.

My environment:
CM 6.0.1
IP phone 9611G ver: 6.23.12
H323
Cisco ASA 55XX.

I got most of VPN configuration fingured out. But one question remaining, regarding NVVPNUSER that contains the string $MACADDR. For the life of me, I could not make the string will be replaced by the telephone's MAC address.

Any though of using IF statement to archive the goal? to stage the phone and it may be preconfigured in a file to eliminate the need for the user to manually enter the value.
## NVVPNUSER specifies the user name to use for VPN authentication.
## Normally, this value is entered by the user and not set in this file.
## However, if the user names are set in a staging environment using IF statements
## based on the telephones' MAC addresses, or if the user name is a fixed string
## based on the serial number and/or the MAC address of the telephone,
## it may be preconfigured in a file to eliminate the need for the user to manually enter the value.
Much appreciated to shed some light.

Kevin

Last edited by macosx2new; 04-05-2013 at 11:53 AM.
Reply With Quote
Reply

Tags
9640, ipo, vpn

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:40 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.